AnyOne know where is this Scripts?

[prashant]

Hello Guy, this is My First Post i'm looking Some TCL Script on Internet 5 day i'm not got!.

1~ Bot give flag Good user like ~> +q(owner), +&(protect), +o(op), +h(half-op), +v(Voice) when they join #channel or command Something like that ppl use in many Channel like !addop <usernickname> and etc they ppl come any time channel bot give +o flag!

2~ I look second Script ~ !seen <usernickname>, !lastspoke, and something like that

3~ third one is those Script ~ ppl use !trigger command then bot Show Currently loaded scripts: !chuck, !fml, !g, !imdb, !topic, !googl, !seen, !nzb, !ping, !tv, !tr, !time, !peak, !ft, !ip, !w, !cg, !lastspoke, !n|!next, !l|!last, !ep

I hope i does not request too much - thank you in Advanced!

[heartbroken]

1-) you can do this without using a script .-> http://www.eggheads.org/support/egghtml ... users.html
just add them "good users" to your eggdrop's users list and give them a flag.

type : .help +user / .help +host / .help chattr in partyline
( http://www.eggheads.org/support/egghtml ... party.html )

except & and ~ flags .. you'll need this -> http://thommey.tclhelp.net/dl/dl.htcl?id=6 thommey's orbitrary chanmodes script for +q and +a modes...

and you can find all the others one by one in egghelp's tcl archive -> http://www.egghelp.org/tcl.htm

[prashant]

@hello heartbroken

i see this Script already the problem is when i use this command on "Good users" When they Join #channel bot Set mode +o user to take 30-60 Sec when they join
i need those script & command when i use it and User-join #Channel Bot Set +o mode a user ~ like Ex. Chanserv Set mode +q (owner) and other mode in a .Sec not take 30-60 sec

i hope you understand my problem!

[Get_A_Fix]

i see this Script already the problem is when i use this command on "Good users" When they Join #channel bot Set mode +o user to take 30-60 Sec when they join
i need those script & command when i use it and User-join #Channel Bot Set +o mode a user ~ like Ex. Chanserv Set mode +q (owner) and other mode in a .Sec not take 30-60 sec

i hope you understand my problem!

I have a similar script to this, for addusers. This comes with its own joinmode proc, which will set each person +o or +v (you can easily add this to set extra modes on 'chanowner' or 'sop' users, like +qo nick nick - or +ao nick nick - etc.
The script can be found here - you may want to edit it yourself, or find someone who knows TCL to help. You could also try to add a post to the adduser script location, if you need help. We should be able to do something for you.

[prashant]

Thankyou Get_A_Fix for this Script

There is Any One Can Re-edit this Script Add Feature more like "+q", "&" and "+h"
I'm not know too much About TCL i cannot Write or fix it TCl Script anyone who know TCl please Fix it

Link of Script - http://forum.ircspeed.info/showthread.php?tid=8
Mirror Link ~ http://pastebin.com/E1D134e6

[Get_A_Fix]

Is this for an OperBot? Is the bot able to override, to be able to set the appropriate modes? Or, have you made the bot a founder of the channel? This is the only way for the bot to be able to set anyone +qo or +ao.

Without being oper, or founder, it wouldn't be able to add the modes properly.

[prashant]

Is this for an OperBot? Is the bot able to override, to be able to set the appropriate modes? Or, have you made the bot a founder of the channel? This is the only way for the bot to be able to set anyone +qo or +ao.

Without being oper, or founder, it wouldn't be able to add the modes properly.

I am founder of my channel or i make my bot As protect (&) they Set Mode "Good User" when they Join #channel

Tell me how is the way Bot set anyone +qo or +ao. I need your Way ~ if you taking about this Method ~> http://www.eggheads.org/support/egghtml ... users.html ~> I already Do! - the problem is when i use this command on "Good users" When they Join #channel bot Set mode +o user to take 30-60 Sec when they join

i need those script & command when i use it and User-join #Channel Bot Set +o mode a user ~ like Ex. Chanserv Set mode +q (owner) and other mode in a .Sec not take 30-60 sec

[Get_A_Fix]

I am founder of my channel or i make my bot As protect (&) they Set Mode "Good User" when they Join #channel

Tell me how is the way Bot set anyone +qo or +ao. I need your Way ~ if you taking about this Method ~> http://www.eggheads.org/support/egghtml ... users.html ~> I already Do! - the problem is when i use this command on "Good users" When they Join #channel bot Set mode +o user to take 30-60 Sec when they join

i need those script & command when i use it and User-join #Channel Bot Set +o mode a user ~ like Ex. Chanserv Set mode +q (owner) and other mode in a .Sec not take 30-60 sec

Huh? I am having problems understanding you. If you want eggdrop to @ people faster, then use .chanset

Code: Select all

.chanset #channel aop-delay 1

This would set any user who matches a handle @ in 1 second.

You might also want to

Code: Select all

.chanset #channel +autoop

Explanation of AOP-DELAY is as follows:

Code: Select all

aop-delay (minimum:maximum)

This is used for autoop, autohalfop, autovoice. If an op or voice joins a channel while another op or voice is pending, the bot will attempt to put both modes on one line.

Code: Select all

aop-delay 0   No delay is used.
aop-delay X   An X second delay is used.
aop-delay X:Y A random delay between X and Y is used.

This information is inside your eggdrop.conf - you simply have to read it.

[prashant]

Thankx Get_A_Fix

if i Set 0 maybe not Problem!

Code: Select all

aop-delay 0   No delay is used. 
aop-delay X   An X second delay is used. 
aop-delay X:Y A random delay between X and Y is used.

Can you Explain this Method how Use it Little Confusion
Example - if i set one "Good User" can tell hole process of only +o Set, if you have no problem mate

Once again Thankx for Helping me Mate

[SoUkSoU]

Hello. I'm using the same tcl for users and i got a stupid issue.

Bot is +v every user who's joining the channel.

How to remove that?

[prashant]

Hello. I'm using the same tcl for users and i got a stupid issue.

Bot is +v every user who's joining the channel.

How to remove that?

try this

Code: Select all

.chanset -autovoice

[SoUkSoU]

Same :/

[prashant]

Same :/

What your mean? mate be more specific!

[Get_A_Fix]

try this

Code: Select all

.chanset -autovoice

heh, don't forget to add the channel

Code: Select all

.chanset #channel <options>

or IF you want to set it for ALL channel's, then use

Code: Select all

.chanset * <options>

The * becomes a wildcard for all channel's the bot is on/supporting.

An example would be

Code: Select all

.chanset * -autovoice

to set all channel's the bot is on -autovoice.

All eggdrop DCC commands can be found Here

Good Luck

[SoUkSoU]

Now the bot is +v only me.

Code: Select all

[06:46:23] * Attempting to rejoin channel #souksou
[06:46:24] * Rejoined channel #souksou
[06:46:24] * Topic is 'For commands type: !coms'
[06:46:24] * Set by f1sh on Mon Jan 13 03:18:36
[06:46:24] * f1sh sets mode: +v SoUkSoU
[06:46:25] * f1sh sets mode: +o SoUkSoU

Flags on me:

Code: Select all

[06:44:11] <f1sh> Global flags for SoUkSoU are now +hjlmnopqtxQ.

[/code]

If i !delaov the bot is deleting me.

Example after !delaov $me

Code: Select all

[06:57:07] <SoUkSoU> .help all
[06:57:07] <f1sh> [21:56:43] #SoUkSoU# help all
[06:57:07] <f1sh> ###  core commands
[06:57:07] <f1sh>    For all users:
[06:57:07] <f1sh>       who          away         quit         whom
[06:57:07] <f1sh>       me           page         match        motd
[06:57:07] <f1sh>       bots         newpass      chat         handle
[06:57:07] <f1sh>       whoami       echo         strip        su
[06:57:07] <f1sh>       trace        fixcodes     bottree      vbottree
[06:57:07] <f1sh>       botinfo      relay        -host
[06:57:07] <f1sh>    For ops:
[06:57:07] <f1sh>       addlog       console      match        whois
[06:57:07] <f1sh> ###  console module commands
[06:57:07] <f1sh>    For all users:
[06:57:07] <f1sh>       store
[06:57:07] <f1sh> ###  notes module commands
[06:57:07] <f1sh>    For all users:
[06:57:07] <f1sh>       notes        +noteign     -noteign     noteigns
[06:57:07] <f1sh>       note
[06:57:07] <f1sh> ###  channels module commands
[06:57:07] <f1sh>    For all users:
[06:57:07] <f1sh>       info