eggdrop + router

bast · Post by **bast** » Thu Apr 26, 2007 1:26 pm

Hey.

Does anyone have a D-link 604 Router and running eggdrop.

Caus i have 6 different bots in my botnet, and i got one that sits behind a D-link router, i have setted this in DMZ mode so the ports shouldent block at all.
But for some reason my hub bot that should connect to this bot, dosen´t
All my other bots connects fine in the botnet, exept for this one.
I can connect it using .link bot2, but kinda annoying.
And yes this bot has the correct flags and that stuff.

So wonder if it´s the router that is blocking or something else perhaps, anyone that have this experience with a D-link.

YooHoo · Post by **YooHoo** » Thu Apr 26, 2007 2:00 pm

I seriously doubt the router has anything to do with your conectivity problem, since you state you can manually link them via .link. I would check to verify that you have the correct flags set on both bots, and post them here if it looks ok to you

bast · Post by **bast** » Thu Apr 26, 2007 3:22 pm

The hub bot has flags hp as it should

Code: Select all

HANDLE    PASS NOTES FLAGS           LAST
bot1   yes      0 blo             19:13 (linked)
BOT FLAGS: hp
HOSTS: *!*@*.se
*!*@*.se
ADDRESS: myadress1.mine.nu
users: xxxx, bots: xxxx

And the second bot has s flag. This bot is behind the router.

Code: Select all

 HANDLE    PASS NOTES FLAGS           LAST
^bot2^    yes      0 blo             19:15 (linked)
HOSTS: *!*@*.com
BOT FLAGS: s
ADDRESS: myadress2.mine.nu
users: xxxx, bots: xxxx

so this bot got the exact same layout as the rest of the bots, so it must be the router or something.

iamdeath · Post by **iamdeath** » Thu Apr 26, 2007 7:40 pm

This occours when you don't properly add the address:port of the hub bot. Make sure the ip you've added in Leaf bot for HUB bot is correct. It happened to me, I corrected the port and it linked automatically.

YooHoo · Post by **YooHoo** » Thu Apr 26, 2007 9:13 pm

bast wrote:HOSTS: *!*@*.se
HOSTS: *!*@*.com

oh my lord

ffs, can't you get a little more specific than this

bast · Post by **bast** » Fri Apr 27, 2007 6:39 am

iamdeath wrote:This occours when you don't properly add the address:port of the hub bot. Make sure the ip you've added in Leaf bot for HUB bot is correct. It happened to me, I corrected the port and it linked automatically.

It has the adress:port, it´s correrct.

2YooHoo2 wrote:oh my lord Shocked
ffs, can't you get a little more specific than this

what? it has the correct host added to. i have double and tripplechecked that to.

YooHoo · Post by **YooHoo** » Fri Apr 27, 2007 3:34 pm

bast wrote:what? it has the correct host added to. i have double and tripplechecked that to.

I was refering to these hostmasks

Code: Select all

*!*@*.com
*!*@*.se

this is not only unwise, but kinda foolhardy

bast · Post by **bast** » Fri Apr 27, 2007 6:07 pm

YooHoo wrote:
bast wrote:what? it has the correct host added to. i have double and tripplechecked that to.
I was refering to these hostmasks
Code: Select all
*!*@*.com
*!*@*.se
this is not only unwise, but kinda foolhardy

well offcource i don´t have it like that

Just removed it when i posted.

YooHoo · Post by **YooHoo** » Sat Apr 28, 2007 11:26 am

bast wrote:well offcource i don´t have it like that
Just removed it when i posted.

oh, well that's a good thing hehe
why don't you simply .deluser the bot, then readd him to your hub? Seems like the simpler solution to your dilemma

bast · Post by **bast** » Sun Apr 29, 2007 5:43 pm

Tried that a couple of times.
It just seems as the second bot dosent tell the hub-bot when it comes online.

And all the other bot´s works and has the same setup and everything. exept that they arent behind a router.

This just annoys me abit, it´s kinda frustrated when you know everything else works, just not this bot.