AllProtection.tcl (Stable: v4.8 / Beta: v4.9b4)

[Sir_Fz]

Make sure the password is correct (and without <>). Also, you can try something like

Code: Select all

putdcc $idx "privmsg nickserv@services.dal.net :identify $antispam(cnick) password"

[willyw]

Excellent!
Which settings, and I will copy them here.
See.... I thought I had them all set off. ....I must be missing something.


Thanks

Everything under

Code: Select all

###########################
#   PRIVATE PROTECTIONS   #
###########################

is related to private floods.

That's what I thought... and I thought I had them all off, like this:

Code: Select all

###########################
#   PRIVATE PROTECTIONS   #
###########################

# Set here if you want the bot to set a restriction mode on itself when flooded.
# example: +R is used on DALnet so only registered users can send to the bot.
# set this to "" if you don't wish to change your bot's modes during a flood.
# NOTE: Maximum 1 mode, less or more means it's disabled.
###set apfp(rmode) R
set apfp(rmode) ""

# Set here the time you want to keep the restriction mode in seconds.
###set apfp(rtime) 30
set apfp(rtime) 5

# How many seconds do you want to stop answering data from server?
##set apfp(itime) 45
set apfp(itime) 5

#
## 1 ## Private text floods.
#

# Private text (lines) flood <lines>:<seconds>. (0:0 to disable)
###set ptextl(punish) 12:6
set ptextl(punish) 0:0


# Private text (chars) flood <chars>:<seconds>. (0:0 to disable)
###set ptextc(punish) 750:6
set ptextc(punish) 0:0


#
## 2 ## Private notice floods.
#

###set pnotil(punish) 6:3
set pnotil(punish) 0:0



###set pnotic(punish) 600:4
set pnotic(punish) 0:0


#
## 3 ## Private CTCP/CTCR flood.
#

###set pctcpf(punish) 4:20
set pctcpf(punish) 0:0




# Configurations end here. #

Yet it was still doing it.

What do you think?

Thanks




also, from previous post:

Just make sure you set a password to that user.

What is the significance of setting a pw?

[Sir_Fz]

Make sure you .rehashed after changing these settings (since they're not dynamic).

About the password advice, just an extra security measure to prevent accessing the partyline (although afaik it's not possible to access the partyline without a password).

[willyw]

Make sure you .rehashed after changing these settings (since they're not dynamic).

Bot has been restarted and rehashed plenty of times, since these changes were made... that's why I was surprised to see it do what I reported.

What do you make of it?

About the password advice, just an extra security measure to prevent accessing the partyline (although afaik it's not possible to access the partyline without a password).

Ok. Didn't know if there might be something new to me there.
Thanks.

[Sir_Fz]

Make sure you .rehashed after changing these settings (since they're not dynamic).

Bot has been restarted and rehashed plenty of times, since these changes were made... that's why I was surprised to see it do what I reported.

What do you make of it?

I checked the code, I'm pretty sure that when the settings are set to 0:0 the script definitely won't react to private floods. Did this happen again after the restart?

[willyw]

Make sure you .rehashed after changing these settings (since they're not dynamic).

Bot has been restarted and rehashed plenty of times, since these changes were made... that's why I was surprised to see it do what I reported.

What do you make of it?

I checked the code, I'm pretty sure that when the settings are set to 0:0 the script definitely won't react to private floods. Did this happen again after the restart?

??

Yes

[Sir_Fz]

Would you mind pasting the content of procedure [pnotc]?

[Jade]

Sir_Fiz

Thanks alot finally the i can identify to my antispam bot nick . This time it worked, i appreciate your quick response over this.

Regards
Jade

[willyw]

Would you mind pasting the content of procedure [pnotc]?

Sure thing.

Code: Select all

proc pnotc {nick uhost hand arg dest} {
 variable pnotil; variable pnotic
 foreach {pntll pntls} [split $pnotil(punish) :] {break}
 foreach {pntcl pntcs} [split $pnotic(punish) :] {break}
 if {[isbotnick [lindex [split $dest @] 0]] && ![matchattr $hand fmo]} {

if {($pntll > 0 && [follow $pntls pnotl $pntll] != -1) || ($pntcl > 0 && [follow $pntcs pnotc $pntcl [string length $arg]] != -1)} {

   privl NOTICE
  }
 }
}

[Sir_Fz]

Well there you have it, based on the logic in this procedure it's impossible for the script to trigger protection against private notices if the settings are set to 0:0. If you still wish to debug this, you can try '.tcl array names ::AllProtection::following' when the protection is triggered and paste the output here.

Edit: Fixed mistake [array names] instead of [array list]

[willyw]

Well there you have it, based on the logic in this procedure it's impossible for the script to trigger protection against private notices if the settings are set to 0:0. If you still wish to debug this, you can try '.tcl array list ::AllProtection::following' when the protection is triggered and paste the output here.

[17:24] AP: Private botnet flood detected. Temporarly stopped answering recieved data.
<mynick> .tcl array list ::AllProtection::following
<botnick> Tcl error: bad option "list": must be anymore, donesearch, exists, get, names, nextelement, set, size, startsearch, statistics, or unset

[Sir_Fz]

My bad, I meant [array names] and not [array list].

[willyw]

My bad, I meant [array names] and not [array list].

np...

Code: Select all

[19:41] AP: Private botnet flood detected. Temporarly stopped answering recieved data.
<mynick> .tcl array names ::AllProtection::following
<botnick> Tcl: pnotc rpt:6a6373a1a0cc54e39ec1868b58dd23c1 rpt:0b116253df5ad80969c09c62d9cf9d84

[Sir_Fz]

willyw, I just tested it on my eggdrop using AllProtection4.6b9 and definitely when pnotil(punish) is set to 0:0 (or any other private flood setting for that matter), the script won't react on any private notice. However, in v4.6b8 that's not the case. Make sure you're using the latest version, that's all I can suggest since I made sure it's working correctly.

[willyw]

willyw, I just tested it on my eggdrop using AllProtection4.6b9 and definitely when pnotil(punish) is set to 0:0 (or any other private flood setting for that matter), the script won't react on any private notice. However, in v4.6b8 that's not the case. Make sure you're using the latest version, that's all I can suggest since I made sure it's working correctly.

I seemed to remember you recommended 4.6b9 to me, and that it was some time ago, at that. Found it mentioned here:
http://forum.egghelp.org/viewtopic.php?p=87383#87383


and:
in header of the script in use now, is:

#Version : 4.6b9 (BETA 9)
# Released: November 08, 2008
# Source: http://Sir-Fz.blogspot.com

I believe I downloaded from:
http://www.4shared.com/file/77031984/a1 ... n46b9.html
but it has been a while.

Whatever modifications to it, have been as per your instructions in this thread.