This is the new home of the egghelp.org community forum.
All data has been migrated (including user logins/passwords) to a new phpBB version.


For more information, see this announcement post. Click the X in the top right-corner of this box to dismiss this message.

DragnLord's weather script

Support & discussion of released scripts, and announcements of new releases.
Post Reply
B
Bonnie
Voice
Posts: 23
Joined: Thu Dec 09, 2004 11:20 am

Post by Bonnie »

Thank you very much. I'm running V4 now and all seems to be doing great. Looks nice :)

Bonnie
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

wz_fcastlines

Post by DragnLord »

setting wz_fcastlines to 0 (zero) will not disable use of wzf, it will only show the "Forecast" and any "Now" lines

if you want to disable use of wzf change the bind, or comment it out
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

Post by DragnLord »

If you have problems with v4 from archive, use download from here before reporting problems.
Last edited by DragnLord on Wed Feb 20, 2008 12:55 am, edited 2 times in total.
m
masinick
Voice
Posts: 9
Joined: Mon Feb 04, 2008 9:54 pm

Post by masinick »

DragnLord wrote:If you have problems with v4 from archive, use download from here before reporting problems.
This version did not work for me. Here is the output I receive when I run it:

weather4.tcl 03301
./weather4.tcl: line 68: setudef: command not found
./weather4.tcl: line 181: proc: command not found
./weather4.tcl: line 184: syntax error near unexpected token `}'
./weather4.tcl: line 184: ` }'
[masinick@mepis1:~]$

Am I using it incorrectly or is there a bug in this particular version?
Brian Masinick
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

minor updates

Post by DragnLord »

problem was found where script did not work with TCL 8.3, fixed (hopefully)
download from link in last post
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

Post by DragnLord »

masinick wrote:
DragnLord wrote:If you have problems with v4 from archive, use download from here before reporting problems.
This version did not work for me. Here is the output I receive when I run it:

weather4.tcl 03301
./weather4.tcl: line 68: setudef: command not found
./weather4.tcl: line 181: proc: command not found
./weather4.tcl: line 184: syntax error near unexpected token `}'
./weather4.tcl: line 184: ` }'
[masinick@mepis1:~]$

Am I using it incorrectly or is there a bug in this particular version?
You do know you need to use that script with eggdrop.....right?
m
masinick
Voice
Posts: 9
Joined: Mon Feb 04, 2008 9:54 pm

No, sorry, I did not, could you guide me a bit?

Post by masinick »

DragnLord wrote:
masinick wrote:
DragnLord wrote:If you have problems with v4 from archive, use download from here before reporting problems.
This version did not work for me. Here is the output I receive when I run it:

weather4.tcl 03301
./weather4.tcl: line 68: setudef: command not found
./weather4.tcl: line 181: proc: command not found
./weather4.tcl: line 184: syntax error near unexpected token `}'
./weather4.tcl: line 184: ` }'
[masinick@mepis1:~]$

Am I using it incorrectly or is there a bug in this particular version?
You do know you need to use that script with eggdrop.....right?
Sorry, I did not realize that this was not a stand alone script. I had one earlier that I thought came from this same place, but it broke a few weeks ago when wunderground changed their format.

Could you guide me a bit or point me to documents that will advise me on what steps are needed? Once I have that information, I should be self sufficient from that point. I appreciate your indulgence, thanks!
Brian Masinick
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

Post by DragnLord »

The stand alone script you used was most likely rosc2112's cli script.
I would advise posting something in rosc's topic about the issue (yes, that means you probably have to use the forum's search function to locate it).

egghelp.org's main website is a great source of information on running an eggdrop.
m
masinick
Voice
Posts: 9
Joined: Mon Feb 04, 2008 9:54 pm

It WAS the weather_cli.tcl script

Post by masinick »

DragnLord wrote:The stand alone script you used was most likely rosc2112's cli script.
I would advise posting something in rosc's topic about the issue (yes, that means you probably have to use the forum's search function to locate it).

egghelp.org's main website is a great source of information on running an eggdrop.
Thanks! You are right, it WAS the weather_cli.tcl script. I will ask him if he has an update. Appreciate the tip and the pointer!
Brian Masinick
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

Re: It WAS the weather_cli.tcl script

Post by DragnLord »

masinick wrote:Thanks! You are right, it WAS the weather_cli.tcl script. I will ask him if he has an update. Appreciate the tip and the pointer!
I'm sure she will be glad to help you.
m
masinick
Voice
Posts: 9
Joined: Mon Feb 04, 2008 9:54 pm

Re: It WAS the weather_cli.tcl script

Post by masinick »

DragnLord wrote:
masinick wrote:Thanks! You are right, it WAS the weather_cli.tcl script. I will ask him if he has an update. Appreciate the tip and the pointer!
I'm sure she will be glad to help you.
Very good! I will ask her! Thanks again!
Brian Masinick
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

v4.1

Post by DragnLord »

v4.1 is available
+ added option to display only forecast with wzf bind
R
ReZNiC
Voice
Posts: 2
Joined: Mon Feb 11, 2008 7:31 pm

Re: v4.1

Post by ReZNiC »

DragnLord wrote:v4.1 is available
+ added option to display only forecast with wzf bind
So when will the LASTEST v41 be fixed since its wind parsing is even more screwed up than the previous version.

ReZ
:oops:
User avatar
DragnLord
Owner
Posts: 711
Joined: Sat Jan 24, 2004 4:58 pm
Location: C'ville, Virginia, USA

Re: v4.1

Post by DragnLord »

ReZNiC wrote:
DragnLord wrote:v4.1 is available
+ added option to display only forecast with wzf bind
So when will the LASTEST v41 be fixed since its wind parsing is even more screwed up than the previous version.

ReZ
:oops:
My wind parsing works as it should, you should check my bot.
R
ReZNiC
Voice
Posts: 2
Joined: Mon Feb 11, 2008 7:31 pm

Re: v4.1

Post by ReZNiC »

DragnLord wrote:
ReZNiC wrote:
DragnLord wrote:v4.1 is available
+ added option to display only forecast with wzf bind
So when will the LASTEST v41 be fixed since its wind parsing is even more screwed up than the previous version.

ReZ
:oops:
My wind parsing works as it should, you should check my bot.
Its not so much all the wind parsing but the wdir that is pulling an additional 'from the' along with a combine output when the setting is for imperial or metric. I don't know what your bot does but all of mine that was running the script outputed the same way. :cry:
Anyway, good luck with it.
ReZ
:twisted:
Post Reply