unable to share user file

[Crys]

I'm not able to share userfiles:

Master:

Code: Select all

Challenging Slave...
Linked to Slave
Creating resync buffer for Slave
Sending user file send request to Slave
Link closed: Slave. No reason (lost 1 bot and 0 users)
(Userlist transmit aborted.)

Slave:

Code: Select all

Received challenge from Master... sending response ...
*** Linked to Master
Downloading user file from Master
Lost userfile transfer from Master; aborting.

There is no firewall between the two hosts. Flags are set according to the howto. share, transfer and channel modules are loaded, compress is disabled and resync in transfer, too. Linking without user file sharing works perfect. Both bots are eggdrop1.6.10 from debian testing.

Crys

[masskilla]

Hi

Set "my-ip" on both bots.

[Darmoth]

could also be a timout problem. have that on dalnet lately, since some of their servers are under attack.

[Crys]

I set my-ip and my-hostname on both bots, but this didn't help. Here is a part of the debug log, when running the slave bot with 'eggdrop -n':

Code: Select all

Received challenge from Master... sending response ...
Downloading user file from Master
net: connect! sock 12
net: eof!(read) socket 12
Lost userfile transfer from Master; aborting.
net: eof!(read) socket 10
Lost bot: Master (lost 1 bot and 1 user).
(Userlist download aborted.)

The slave bot is running on an IPv6 Testcomputer. Could this be the problem?

Crys

[Crys]

By the way, telnet and DCC are working fine, even netbot update is transfering files without any problem. That's strange %-(

Crys

[kenny]

I am running into the same issues. I set up a small net, 2 are working fine 2 are having the same issue. I am running eggdrop 1.6.12 with netbots.tcl and the following modules:
Module: seen (v2.0)
Module: share (v2.3)
Module: transfer (v2.2)
Module: uptime (v1.2)
Module: encryption (v2.1)
Module: console (v1.1)
Module: notes (v2.1)
Module: irc (v1.3)
Module: ctcp (v1.0)
Module: server (v1.2)
Module: channels (v1.0)
Module: dns (v1.0)
Module: eggdrop (v106.12)
I have set them up all the same way, however I get the same error as well.
[15:39] Downloading user file from *hub*
[15:39] Failed connection; aborted userfile transfer.

[Photon]

Tbh that sounds like a firewall problem ... I had the same thing.

Check the addresses and ports on both bots for each other (although I think these must be right, seeing as the request is getting through) - and if you are running debian, are you sure you arent running ipchains/iptables?

try setting nat-ip is my only other suggestion.

[ppslim]

On top, try disabling the resync buffer.

This is settable in the config file, under tha shsare options.

[kenny]

It ended up being some really bitchy firewall settings. After that was fixed all was good.
Thanks,
-kenny-