Having difficult problems with Windrop together with Sitesta

perra_himself · Post by **perra_himself** » Sun Mar 23, 2003 11:14 am

Hi everybody I am expericing some very unusual problems with my eggdrop when I have installed SiteStat (with Windrop support).

This is how it is :
I have 2 connection , the first one everything works out fine on , it connects to my RaidenFTPD and joins the channel it should
But when copying all the same files to my other comp with another connection, to start the bot there this happends when i have started eggdrop.exe. It´s tryin to connect to the same site like this:

Socket connected --> sock568
Welcome to xxx FTP please enter your username

and then it stops and I can see c:\windrop\ in the command prompt

I have changed the DNS and so. I don´t know what is wrong. The sitestat homepage sucks when looking for help, maybe someone can send me some templates or samples of it or maybe help me?

Regards / Per

ppslim · Post by **ppslim** » Sun Mar 23, 2003 12:07 pm

If you are seeing this on the command promp, then the bot is not loaded. You will need to find out why the bot existed.

perra_himself · Post by **perra_himself** » Sun Mar 23, 2003 12:29 pm

hi!
i have tried so much , it works here at home but not on my other connection even if I have changed to the proper dns

But if i deactivate the script it works and the bot joins.

ppslim · Post by **ppslim** » Sun Mar 23, 2003 12:54 pm

Then you need to fidn the error message, and rectify what is causing this.

DNS and other issues may not be of concern. The error will give you more, and possibly a DEBUG file, or log files.

es5 · Post by **es5** » Fri Apr 18, 2003 10:49 am

Hi,

i have the same problem with sitestat but the thingi is if i load sitestat after i started eggdrop with rehash it works.
That's the last i see if i load the script directly on startup:
ftp: attempting to connect...
> Starting new connection with: no options
> opening connection to server -> 192.168.0.1
:: sock568 ::
> socket connected -> sock568
> 220-This server is for private use only
and then it goes back to prompt
i also added in the eggdrop config set debug-mode 1 but i don't get more infos. U can also see in the ftp server that there is an incoming connection so i don't get what the problem is.
Any idea what this causes or is it perhaps that eggdrop terminates the script after an amount of time on startup?

The Bot is a windrop 1.6.13 with CYGWIN_NT-5.0 1.3.22(0.78/3/2)
i also added bseen module on startup.