Problems linking two eggdrops due to bad src port

ribe · Post by **ribe** » Sun Jan 06, 2002 9:13 pm

My problem is as subject.

[00:05] Refused 217.208.96.01/64909 (bad src port)

Never ever experienced this problem!?!

Any suggestions in the solving of this?
Is it the the hub bots problem or the "client bot"? I have tried linking both ways and it is the same problem.

ppslim · Post by **ppslim** » Sun Jan 06, 2002 9:50 pm

Now you have either changed the output you gave, or somthing is screwed.

An IP ending with 01

ribe · Post by **ribe** » Mon Jan 07, 2002 8:59 am

Very stupid of me, it should be .1
Well the ip adress is correct.

ppslim · Post by **ppslim** » Mon Jan 07, 2002 11:58 am

By any chance, are you lining windrops to eggdrops?

ribe · Post by **ribe** » Mon Jan 07, 2002 1:30 pm

This is two eggdrops running eggdrop-1.6.7 on two proper working OpenBSD machines. Ports are open on the FW to them to communicate. And there are no filters for outgoing traffic.
I managed to link them when using simple.conf
but not now with the advanced.conf. Maybe the problem can be there?

Note. I tried setting up an eggdrop from an other location with the same config file (modified ofcourse) and I recive the same error.

ppslim · Post by **ppslim** » Mon Jan 07, 2002 4:52 pm

Try changing the portrange values in the config files.

guppy · Post by **guppy** » Wed Jan 09, 2002 12:27 am

On 2002-01-07 13:52, ppslim wrote:
Try changing the portrange values in the config files.

*nod* This is the reason <g>

This is why I removed that setting in newer 1.6.x (I think 1.6.7+).

Jeff