need some help with stats.mod

Xpro · Post by **Xpro** » Wed Feb 09, 2005 4:29 am

can somone help me with this one? :

Tcl error in file 'eggdrop.conf':
[23:27] invalid command name "loadslang"
while executing
"loadslang language/stats.lang"
(file "scripts/stats.conf" line 65)
invoked from within
"source scripts/stats.conf"
(file "eggdrop.conf" line 1331)
[23:27] * CONFIG FILE NOT LOADED (NOT FOUND, OR ERROR)

it should be ok, but i still get this error

^DooM^ · Post by **^DooM^** » Wed Feb 09, 2005 7:02 am

There is something wrong with stats.conf in your scripts directory. Make sure you have filled everything out properly. Also What editor did you use to alter the config file? Dont use MS Word to edit configs or scripts use Notepad or a decent editor such as editplus.

Alchera · Post by **Alchera** » Wed Feb 09, 2005 7:20 am

"language/stats.lang" <== missing file

KrzychuG · Post by **KrzychuG** » Wed Feb 09, 2005 10:50 am

In my oppinion stats module isn't loaded, probaly isn't installed/compiled too ;)

YooHoo · Post by **YooHoo** » Wed Feb 09, 2005 1:26 pm

this is the error that is returned if stats.mod was improperly loaded... You must copy the language files into your bot's language directory... and ffs, read that lil document called "README"...it is all explained well enough there...example:

Code: Select all

cd eggdrop1.6.17/src/mod/stats.mod/language
cp * ~/yourbotdirectory/language

Xpro · Post by **Xpro** » Wed Feb 09, 2005 1:27 pm

used pico to edit it and i precompiled it and installed it on an other linuxbox (stats.mod works fine there)
after that i uploaded it to my shellserver (i cant compile it there, C is missing)
can this be the problem?

and i copied the file to

YooHoo · Post by **YooHoo** » Wed Feb 09, 2005 4:58 pm

Installation instructions for stas.mod1.3.2.........

Installation:
-------------

Stats.mod will work with eggdrop1.6.x and eggdrop1.4.x.

The following instructions assume, ~/eggdrop1.6/ is the directory
where you installed your eggdrop from. (of course, other source dirs
will work as well)
Unfortunately, you need to compile stats.mod within your eggdrop source,
so if you removed your original compile directory, you'll have to
compile the whole bot again... sorry.

Put stats.mod.1.3.2.tar.gz in ~/eggdrop1.6/src/mod/,
and unpack it (tar xfz stats.mod.1.3.2.tar.gz). Change directory
back to ~/eggdrop1.6/. Type 'make config' (on eggdrop 1.4, you can skip
that part) Type 'make', wait until compiling
is done and use 'make install' to install the bot and stats.mod.

Don't forget to copy the language files from ~/eggdrop1.6/src/mod/stats.mod/ to
~/eggdrop/language/ !

All settings can be found in ~/eggdrop1.6/src/mod/stats.mod/stats.conf
I suggest to copy it to your eggdrop directory (probably ~/eggdrop/),
edit it to fit your needs and put a 'source stats.conf' at the end of
your eggdrop config file. This will execute the config file with every
restart or rehash.

Xpro wrote:used pico to edit it and i precompiled it and installed it on an other linuxbox (stats.mod works fine there)
after that i uploaded it to my shellserver (i cant compile it there, C is missing)
can this be the problem?

uh-huh

KiLL · Post by **KiLL** » Tue Aug 02, 2005 4:16 pm

is this problem solved yet

today i was compiling eggdrop and i got the same problem, so i "googled" and found this post... excatly the same...
i did everithing excatly as it should... i did this many times before on different shells and did not have any problems..
so can some on please point me or tell me what to do... ?

demond · Post by **demond** » Tue Aug 02, 2005 4:37 pm

there is no problem to solve, you need to do a proper stats.mod install

also make sure that [loadslang] command is used after module is loaded (loadmodule stats)

testebr · Post by **testebr** » Thu Dec 25, 2008 9:41 pm

My eggdrop.conf:

Code: Select all

...
loadmodule stats

######### TCLS #########
set error ""
foreach script {
stats.conf
} {
catch {source scripts/$script} error
if {$error != ""} {putcmdlog "\002SCRIPT ERROR\002:$script\: $::errorInfo"}
}
....

And here my stats.conf:

Code: Select all

# reset old slangs before we load the new ones...
resetslang

# load the default language
loadslang language/stats.lang

##  load additional languages
loadslang pt-br language/stats.pt-br.lang
#
## assign a language to a channel
setchanslang #channel pt-br

But stop with same error:

Code: Select all

[23:32:52] <CoolStatsBeta> Rehashing.
[23:32:52] <CoolStatsBeta> [23:32] Rehashing ...
[23:32:52] <CoolStatsBeta> [23:32] * IDENTITY CHANGE: unixfire1 -> CoolStats
[23:32:52] <CoolStatsBeta> [23:32] Listening at telnet port 5101 (bots).
[23:32:52] <CoolStatsBeta> [23:32] Listening at telnet port 5101 (users).
[23:32:52] <CoolStatsBeta> [23:32] Listening at telnet port 5101 (all).
[23:32:52] <CoolStatsBeta> [23:32] * IDENTITY CHANGE: CoolStats -> xxxxx
[23:32:52] <CoolStatsBeta> [23:32] Loading default slangfile: language/stats.lang
[23:32:52] <CoolStatsBeta> [23:32] Loading slangfile for pt-br: language/stats.pt-br.lang
[23:32:52] <CoolStatsBeta> [23:32] SCRIPT ERROR:stats.conf: errorInfo.txt
[23:32:52] <CoolStatsBeta> [23:32] Userfile loaded, unpacking...

The stats.mod is working fine, but all in default language (english).

And YES, my file stats.pt-br.lang is on correct folder ~/eggdrop/language

Any idea how to fix it?

Thanks

Post by **nml375** » Mon Dec 29, 2008 6:40 am

The following piece of code is flawed:

Code: Select all

catch {source scripts/$script} error
if {$error != ""} {putcmdlog "\002SCRIPT ERROR\002:$script\: $::errorInfo"}
}

Try something like this instead:

Code: Select all

if {[catch {source scripts/$script} error]} {
 putcmdlog "\002SCRIPT ERROR\002:$script\: $error"}
}