Notice ban Script needed

Smurff · Post by **Smurff** » Wed Feb 09, 2005 6:46 pm

hi

I need a script which can set the channel +m for specified time incase there is a single channel notice.
I tried Noticeban1.1.tcl by Pulse. But it only bans for the channel notice and doesn't set the channel as +m. This could be helpful against (channel notice floods).

thanxx

Alchera · Post by **Alchera** » Wed Feb 09, 2005 7:02 pm

Just modify the script by inserting the following line before each of the 3 bans being set:

Code: Select all

putquick "MODE $chanz +m" -next

De Kus · Post by **De Kus** » Thu Feb 10, 2005 2:22 am

Alchera wrote:Just modify the script by inserting the following line before each of the 3 bans being set:
Code: Select all
putquick "MODE $chanz +m" -next

he wants to have it a specified time, so he needs also:

Code: Select all

timer 10 [subst "pushmode $chanz -m"]

to add after the putquick. time is in minutes, if you need less than 2, you should use utimer which works in seconds.

Alchera · Post by **Alchera** » Thu Feb 10, 2005 6:01 am

Ooops! Need to clean my glasses.

Post by **user** » Thu Feb 10, 2005 6:34 am

De Kus wrote:
Code: Select all
timer 10 [subst "pushmode $chanz -m"]

'subst'? how did you get that idea...try 'list' instead

Smurff · Post by **Smurff** » Thu Feb 10, 2005 8:54 am

# Punishment method
# 1 - kick 2 - server ban 3 - local ban, 4 - global ban

set punishm "2"

# Kick Reason

set kickr "Don't use channel notice, \002only\002 channel ops(@)/voices(+) can use it."

# Ban type
# I guess it's enough

# 1 - *!*@host.domain

set bantype "1"

# Ban reason
set banr "You may \002NOT\002 use channel notice."

# Ban time in mins, 0 = perm ban, will be used only if you set punishm to 3 or 4
set btime "360"

bind NOTC - * NoticeBan
proc NoticeBan {nick uhost handle text dest} {
global botnick punishm kickr banr btime chanz bantype
if {(![validchan $dest]) || (![botisop $dest])} { return 0 }
if {[matchattr $nick mo|mo $dest] || [isop $nick $dest] || [isvoice $nick $dest] || [matchattr $nick o|o $dest]} {return 0}
if {([isbotnick $nick]) || ([string tolower $nick] == "chanserv") || (![onchan $nick $dest])} {return 0}
if {($chanz != "") && ([lsearch -exact [split [string tolower $chanz]] [string tolower $dest]] == -1)} {return 0}
if {$punishm != "1"} {
switch -- $bantype {
1 { set banmask "*!*@[lindex [split $uhost @] 1]" }
2 { set banmask "*!$uhost" }
3 { set banmask "*!*$uhost" }
4 { set banmask "*![lindex [split $uhost @] 0]@*" }
5 { set banmask "*!*[lindex [split $uhost @] 0]@*" }
6 { set banmask "$nick!*@*" }
7 { set banmask "$nick![lindex [split $uhost @] 0]@*" }
8 { set banmask "$nick!$uhost" }
9 { set banmask "$nick!*$uhost" }
10 { set banmask "$nick!*@[lindex [split $uhost @] 1]" }
default { set banmask "*!*@[lindex [split $uhost @] 1]" }
return $banmask
}
}
if {$punishm == "1"} {
putquick "MODE $chanz +m" -next
timer 10 [subst "pushmode $chanz -m"]
putserv "KICK $dest $nick :$kickr"
}
if {$punishm == "2"} {
putquick "MODE $chanz +m" -next
timer 10 [subst "pushmode $chanz -m"]
putserv "MODE $dest +b $banmask"
putserv "KICK $dest $nick :$kickr"
}
if {$punishm == "3"} {
newchanban "$dest" "$banmask" "NoticeBan" "$banr" "$btime"
putserv "KICK $dest $nick :$kickr"
}
if {$punishm == "4"} {
newban "$banmask" "NoticeBan" "$banr" "$btime"
putserv "KICK $dest $nick :$kickr"
}
return 1
}

Have i put it in the proper place ? and if i want to use utimer for the +m in seconds should i put "utimer" instead of "timer" ?

Thanks alot for your help

^DooM^ · Post by **^DooM^** » Thu Feb 10, 2005 9:34 am

yes thats in the right place but as user said you should use list rather than subst and utimer is used in seconds.

Post by **Sir_Fz** » Thu Feb 10, 2005 11:03 am

Smurff wrote:timer 10 [subst "pushmode $chanz -m"]

this is a timer, meaning the bot will remove the +m after 10 minutes. If you want to decrease this to seconds you can use utimer. for example:

Code: Select all

utimer 30 [list pushmode $dest -m]

which will set mode -m after 30 seconds.

NOTE: $dest is the variable for the channel in your code not $chanz

Bingooss · Post by **Bingooss** » Thu Feb 10, 2005 3:15 pm

try this it will work for u

#Channels where the notice script is supposed to work on.
set noticechans "#channel #channel2 #channel3"

bind notc - "*" chan:notice:kick

proc chan:notice:kick {nick uhost hand text {chan ""}} {
global botnick noticechans notice_lock
if {([lsearch -exact [string tolower $noticechans] [string tolower $chan]] == -1) || ([string equal $nick "ChanServ"]) || (![botisop $chan]) || ([isbotnick $nick]) || ([isop $nick $chan]) || ([isvoice $nick $chan]) || ([string match "Server flood protection activated for" $text])} { return 0 }
if {(![info exists notice_lock($chan)]) && (![string match *m* [getchanmode $chan]])} {
putquick "MODE $chan +mR flood.locked" -next;
set notice_lock($chan) "locked"; utimer 10 [list remove:lock $chan]
if {([info exists notice_lock($chan)])} { utimer 20 [list unset notice_lock($chan)] }
}
set noticeban "*!*@[lindex [split $uhost "@"] 1]"; putquick "MODE $chan +b $noticeban" -next; timer 5 "pushmode $chan -b $noticeban"
putquick "KICK $chan $nick :12,0The Usage Of 2*Notices* 12In This Channel 2Is Prohibited." -next
foreach user [chanlist $chan] {
if {([string match -nocase *$noticeban* "${user}![getchanhost $user $chan]"]) && (![isop $user $chan]) && (![isvoice $user $chan])} {
putquick "KICK $chan $user :(3Channel Notice Detected.)" -next
}
}
return 0
}

proc remove:lock {chan} {
if {([botisop $chan]) && ([string match *m* [getchanmode $chan]])} {
putquick "MODE $chan -mR unlocked"; return
}
}

greenbear · Post by **greenbear** » Thu Feb 10, 2005 3:19 pm

please use he code tag when posting code

De Kus · Post by **De Kus** » Thu Feb 10, 2005 7:06 pm

user wrote:
De Kus wrote:
Code: Select all
timer 10 [subst "pushmode $chanz -m"]
'subst'? how did you get that idea...try 'list' instead

lol, sorry, I don't know, figured it out just today. I don't know, I must have copied any script which used it wrong and then continued to use it @_o. fixed today already 2 scripts of mine relating to this

. using subst works... as long there are no strings like [die]

.

awyeah · Post by **awyeah** » Fri Feb 11, 2005 8:57 am

Use the one Bingooss gave. I made it for the same purpose which you wish to use it for some time earlier ago. It will basically lock the channel on a single channel notice and kick/ban the user who made the notice and everyone match that users hostmask in the format: *!*@domain.host.com.

Alchera · Post by **Alchera** » Fri Feb 11, 2005 5:25 pm

awyeah wrote:and everyone match that users hostmask in the format: *!*@domain.host.com.

So, every poor sod using the same ISP gets banned for the error of just one user?

I prefer *!*user@*.domain myself, simply to be fair.

greenbear · Post by **greenbear** » Fri Feb 11, 2005 6:54 pm

and why noone is using the built in maskhost feature is beyond me..

awyeah · Post by **awyeah** » Sat Feb 12, 2005 10:54 am

Maskhost will definately ban a whole ISP, so its better if we just dont use it in *!*@host.domain.com types of banmasks, espcially for channels who have user limit 300+, well you can modify the banmask, thats not my concern.

So, every poor sod using the same ISP gets banned for the error of just one user?

Needless to say Alchera, I use the same script, well bit more modified according to my intentions on one of DALnet's largest populated channels, and the most flooded too. The script works fine there, no user, op, sop or anyone has complained ever.

See this stops drones from entering and kicks them, because mass join botnets mostly use notices as a tactic for flooding, so when it sees a notice from anyone wham, ban all those lamers and kick them. However yes it kicks people who perform a notice which isn't an op or voice. Everyone knows the rule no one can notice the channel except the ops/voices.

Besides even if an *!*@host gets banned, and we don't kick them there already banned? right? so they can't speak or do anything while in the channel so we might as well kick them heh.