AllProtection.tcl (Stable: v4.8 / Beta: v4.9b4)

Post by **Sir_Fz** » Mon Jul 11, 2005 2:17 pm

Well, on DALnet you can have akick, aop or sop access (aside from founder access) and you can't have both at the same time which does make a lot of sense if you ask me, you can remove your own akick only if you identify the channel and do so (thus you'll have founder access). I won't add this in my script but you can post this request in the forum and I'm sure we'll help you.

Thunderdome · Post by **Thunderdome** » Mon Jul 11, 2005 3:34 pm

I think I already did, but no one gave a crap. lol

http://forum.egghelp.org/viewtopic.php?t=9887

here!
Can you help me out?
Thanks!

ps: by the way, ya script is getting to be trutly exquisite...

minted · Post by **minted** » Sat Jul 23, 2005 11:14 am

Tcl error [text:line]: expected integer but got ""
Tcl error [repeat:kick]: expected integer but got ""

i get this msg in dcc chat when a protection is triggered
but my bot does nothing
have i set something up wrong?

Post by **Sir_Fz** » Sat Jul 23, 2005 11:20 am

Never happened on my bot and nothing similar was reported so it's most probably your problem (invalid settings). type '.set errorInfo' in the dcc chat to know more about the error.

Alchera · Post by **Alchera** » Sat Jul 23, 2005 6:49 pm

Sir_Fz wrote:Well, on DALnet .... you can remove your own akick only if you identify the channel and do so (thus you'll have founder access).

-ChanServ- Command - AKICK

Maintains the channel AutoKick list.
If a user on the channel AKICK list does try to join a channel, then they will be kicked by ChanServ, as well as banned.
WIPE is limited to the channel founder, ADDing and DELeting AKICKs is limited to SOps or above, list can be used by AOps or above.

minted · Post by **minted** » Sat Jul 23, 2005 8:15 pm

Sir_Fz wrote:Never happened on my bot and nothing similar was reported so it's most probably your problem (invalid settings). type '.set errorInfo' in the dcc chat to know more about the error.

i tried .set errorinfo and got ...What? You need '.help'

[18:08] Tcl error [nickf:kick]: illegal channel: *
[18:08] Tcl error [bnick:kick]: illegal channel: *

i just noticed i get this msg also, when my bots connecting and joining rooms
i unloaded the protection addon and both these stop showing in my dcc chat
i tried downloading it again and starting from scratch and still get these errors
also, i've set this up for about 14 channels, which shows as so...

set textl(chans) "#chan1 #chan2 #chan3 #chan4 #chan5 etc....
#chan12 #chan13 #chan14"

it takes up 2 lines on my putty display. would the # at the start of the 2nd line of channels make that line ignored? or is that irrelevant?

YooHoo · Post by **YooHoo** » Sun Jul 24, 2005 2:57 pm

minted wrote:
Sir_Fz wrote:Never happened on my bot and nothing similar was reported so it's most probably your problem (invalid settings). type '.set errorInfo' in the dcc chat to know more about the error.
i tried .set errorinfo and got ...What? You need '.help'

Place a hash mark in front of the unbind set line in your conf file to enable the set command

minted · Post by **minted** » Sun Jul 24, 2005 3:14 pm

nvm, i redid the whole bot

it was new neway
but yea, its working now (so it was my mistake, as i thought neway)
tnx for the help though

great addon btw

Post by **Sir_Fz** » Tue Jul 26, 2005 7:51 am

Version 4.3 is out (see initial post) and has been submitted to the tcl archive so it should be there in few days. Fixed those bugs and the errors in the mass ban/kick/deop protections + added the ability to use "*" if you want the script to work on all channels.

st33l · Post by **st33l** » Mon Aug 01, 2005 1:24 pm

I want to say about privat protection.
What user do?
1. Flood in privat
2. Bot sets ignor
3. Now user can flood on chanel

greenbear · Post by **greenbear** » Mon Aug 01, 2005 1:46 pm

haha, thats pretty clever

dotslasher · Post by **dotslasher** » Mon Aug 01, 2005 5:40 pm

heh yup most flood protections do that for private floods, ignore person --> then he can flood the channels.

maybe kickban from all channels on serious flood?

Post by **Sir_Fz** » Mon Aug 01, 2005 6:25 pm

Never thought about this one, but atleast you can disable the ignore and leave the mode function (i.e let your bot set +R or a similar mode which depends on the network) An idea would be to set a global ban on the ignored hosts, any alternatives?

demond · Post by **demond** » Mon Aug 01, 2005 9:02 pm

Sir_Fz wrote:Never thought about this one, but atleast you can disable the ignore and leave the mode function (i.e let your bot set +R or a similar mode which depends on the network) An idea would be to set a global ban on the ignored hosts, any alternatives?

Code: Select all

# If you want Eggdrop to trigger binds for ignored users, set this to 1.
set trigger-on-ignore 0

Post by **Sir_Fz** » Mon Aug 01, 2005 9:27 pm

How can we stop other binds from triggering without ignoring?