hi,
i have the same problem.
when i start with eggdrop -m eggdrop.conf then they say (german)
Eggdrop v1.6.13+sharefix (C) 1997 Robey Pointer (C) 2002 Eggheads
[22:54] --- Loading eggdrop v1.6.13+sharefix (Fri Dec 30 2005)
Generated config for eggdrop 1.6
on Thu Dec 29 14:38:43 EST 2005
[22:54] Listening at telnet port 3333 (all)
[22:54] Modul geladen: dns
[22:54] Modul geladen: channels
[22:54] Modul geladen: server
[22:54] Modul geladen: ctcp
[22:54] Modul geladen: irc
[22:54] Modul geladen: transfer (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: share
[22:54] Modul geladen: compress
[22:54] Modul geladen: filesys (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: notes (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: console (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: seen
[22:54] Modul geladen: blowfish
[22:54] Modul geladen: assoc (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: wire (mit Sprach-Unterstuetzung)
[22:54] Modul geladen: uptime
[22:54] Userinfo TCL v1.07 loaded (URL BF GF IRL EMAIL DOB PHONE ICQ).
[22:54] use '.help userinfo' for commands.
STARTE DEN BOT IM BENUTZERDATEI-ERSTELLUNGS-MODUS.
Baue eine Telnetverbindung zu dem Bot auf und gib 'NEW' als Deinen Nickname ein
ODER gehe ins IRC und: /msg Silent hello
Dies macht Dich zum Master des Bots.
[22:54] === Silent: 1 channels, 0 users.
Launched into the background (pid: 8072)
but wehn i start with eggdrop -mn eggdrop.conf
Eggdrop v1.6.13+sharefix (C) 1997 Robey Pointer (C) 2002 Eggheads
[22:56] Allocated bind table unld (flags 1)
[22:56] Allocated bind table time (flags 1)
[22:56] Allocated bind table note (flags 0)
[22:56] Allocated bind table nkch (flags 1)
[22:56] Allocated bind table load (flags 1)
[22:56] Allocated bind table link (flags 1)
[22:56] Allocated bind table filt (flags 1)
[22:56] Allocated bind table disc (flags 1)
[22:56] Allocated bind table dcc (flags 0)
[22:56] Allocated bind table chpt (flags 1)
[22:56] Allocated bind table chon (flags 1)
[22:56] Allocated bind table chof (flags 1)
[22:56] Allocated bind table chjn (flags 1)
[22:56] Allocated bind table chat (flags 1)
[22:56] Allocated bind table bot (flags 0)
[22:56] Allocated bind table bcst (flags 1)
[22:56] Allocated bind table away (flags 1)
[22:56] Allocated bind table act (flags 1)
[22:56] Allocated bind table evnt (flags 1)
[22:56] --- Loading eggdrop v1.6.13+sharefix (Fri Dec 30 2005)
Generated config for eggdrop 1.6
on Thu Dec 29 14:38:43 EST 2005
[22:56] LANG: Language loaded: german
[22:56] LANG: 394 messages of 452 lines loaded from ./language/core.german.lang
[22:56] LANG: 0 adds, 394 updates to message table
[22:56] Logfile suffix changed. Closing all open logs.
[22:56] Listening at telnet port 3333 (all)
[22:56] Modul geladen: dns
[22:56] Modul geladen: channels
[22:56] Allocated bind table wall (flags 1)
[22:56] Allocated bind table raw (flags 1)
[22:56] Allocated bind table notc (flags 1)
[22:56] Allocated bind table msgm (flags 1)
[22:56] Allocated bind table msg (flags 0)
[22:56] Allocated bind table flud (flags 1)
[22:56] Allocated bind table ctcr (flags 1)
[22:56] Allocated bind table ctcp (flags 1)
[22:56] Modul geladen: server
[22:56] Modul geladen: ctcp
[22:56] Allocated bind table topc (flags 1)
[22:56] Allocated bind table splt (flags 1)
[22:56] Allocated bind table sign (flags 1)
[22:56] Allocated bind table rejn (flags 1)
[22:56] Allocated bind table part (flags 1)
[22:56] Allocated bind table nick (flags 1)
[22:56] Allocated bind table mode (flags 1)
[22:56] Allocated bind table kick (flags 1)
[22:56] Allocated bind table join (flags 1)
[22:56] Allocated bind table pubm (flags 1)
[22:56] Allocated bind table pub (flags 0)
[22:56] Allocated bind table need (flags 1)
[22:56] Modul geladen: irc
[22:56] Allocated bind table rcvd (flags 1)
[22:56] Allocated bind table sent (flags 1)
[22:56] Allocated bind table lost (flags 1)
[22:56] Allocated bind table tout (flags 1)
[22:56] LANG: Section loaded: transfer
[22:56] LANG: 59 messages of 65 lines loaded from ./language/transfer.english.la
ng
[22:56] LANG: 59 adds, 0 updates to message table
[22:56] Modul geladen: transfer (mit Sprach-Unterstuetzung)
[22:56] Modul geladen: share
[22:56] Modul geladen: compress
[22:56] Allocated bind table fil (flags 0)
[22:56] LANG: Section loaded: filesys
[22:56] LANG: 53 messages of 58 lines loaded from ./language/filesys.english.lan
g
[22:56] LANG: 53 adds, 0 updates to message table
[22:56] LANG: 53 messages of 62 lines loaded from ./language/filesys.german.lang
[22:56] LANG: 0 adds, 53 updates to message table
[22:56] Modul geladen: filesys (mit Sprach-Unterstuetzung)
[22:56] LANG: Section loaded: notes
[22:56] LANG: 42 messages of 47 lines loaded from ./language/notes.english.lang
[22:56] LANG: 42 adds, 0 updates to message table
[22:56] LANG: 42 messages of 47 lines loaded from ./language/notes.german.lang
[22:56] LANG: 0 adds, 42 updates to message table
[22:56] Modul geladen: notes (mit Sprach-Unterstuetzung)
[22:56] LANG: Section loaded: console
[22:56] LANG: 10 messages of 15 lines loaded from ./language/console.english.lan
g
[22:56] LANG: 10 adds, 0 updates to message table
[22:56] LANG: 10 messages of 15 lines loaded from ./language/console.german.lang
[22:56] LANG: 0 adds, 10 updates to message table
[22:56] Modul geladen: console (mit Sprach-Unterstuetzung)
[22:56] Modul geladen: seen
[22:56] Modul geladen: blowfish
[22:56] LANG: Section loaded: assoc
[22:56] LANG: 16 messages of 21 lines loaded from ./language/assoc.english.lang
[22:56] LANG: 16 adds, 0 updates to message table
[22:56] LANG: 16 messages of 21 lines loaded from ./language/assoc.german.lang
[22:56] LANG: 0 adds, 16 updates to message table
[22:56] Modul geladen: assoc (mit Sprach-Unterstuetzung)
[22:56] LANG: Section loaded: wire
[22:56] LANG: 10 messages of 15 lines loaded from ./language/wire.english.lang
[22:56] LANG: 10 adds, 0 updates to message table
[22:56] LANG: 10 messages of 17 lines loaded from ./language/wire.german.lang
[22:56] LANG: 0 adds, 10 updates to message table
[22:56] Modul geladen: wire (mit Sprach-Unterstuetzung)
[22:56] Modul geladen: uptime
[22:56] Userinfo TCL v1.07 loaded (URL BF GF IRL EMAIL DOB PHONE ICQ).
[22:56] use '.help userinfo' for commands.
STARTE DEN BOT IM BENUTZERDATEI-ERSTELLUNGS-MODUS.
Baue eine Telnetverbindung zu dem Bot auf und gib 'NEW' als Deinen Nickname ein.
ODER gehe ins IRC und: /msg Silent hello
Dies macht Dich zum Master des Bots.
[22:56] === Silent: 1 channels, 0 users.
[22:56] main: entering loop
[22:56] Versuche Server irc.ogamenet.net:6667
[22:56] DNS resolved irc.ogamenet.net to 83.133.81.179
[22:56] dequeue_sockets(): errno = 128 (Transport endpoint is not connected) on
6
[22:56] Timeout: connect to irc.ogamenet.net
the bot dont connect to the irc
(
i searched by google, but i dont found a answer....
pls help me.
here my server module
#### SERVER MODULE ####
# This module provides the core server support. You have to load this
# if you want your bot to come on IRC. Not loading this is equivalent
# to the old NO_IRC define.
loadmodule server
# What is your network?
# 0 = EFnet
# 1 = IRCnet
# 2 = Undernet
# 3 = DALnet
# 4 = +e/+I/max-modes 20 Hybrid
# 5 = Others
set net-type 5
# Set the nick the bot uses on IRC, and on the botnet unless you specify a
# separate botnet-nick, here.
set nick "Silent"
# Set the alternative nick which the bot uses on IRC if the nick specified
# by 'set nick' is unavailable. All '?' characters will be replaced by random
# numbers.
set altnick "TheSilent"
# Set what should be displayed in the real-name field for the bot on IRC.
set realname "iCe_RulZ"
# This is a Tcl script to be run immediately after connecting to a server.
bind evnt - init-server evnt:init_server
proc evnt:init_server {type} {
global botnick
putquick "MODE $botnick +i-ws"
}
# Set the default port which should be used if none is specified with
# '.jump' or in 'set servers'.
set default-port 6667
# This is the bot's server list. The bot will start at the first server listed,
# and cycle through them whenever it gets disconnected. You need to change these
# servers to YOUR network's servers.
#
# The format is:
# server[:port[:password]]
#
# Both the port and password fields are optional; however, if you want to set a
# password you must also set a port. If a port isn't specified it will default to
# your default-port setting.
set servers {
irc.ogamenet.net:6667
irc.ogamenet.net
irc.ogamenet:6667
ogamenet:6667
irc.ogamenet.net:8080
}
# This setting makes the bot try to get his original nickname back if its
# primary nickname is already in use.
set keep-nick 1
# Set this to 1 if you don't want your the bot to strip a leading '~' on
# user@hosts.
set strict-host 1
# This setting makes the bot squelch the error message when rejecting a DCC
# CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
# command has been rejected because they don't have access. Note that sometimes
# IRC server operators detect bots that way.
set quiet-reject 1
# If you want your bot to answer lower case ctcp requests (non rfc-
# compliant), set this setting to 1. mIRC will do this, most other
# clients will not.
set lowercase-ctcp 0
# Set how many ctcps should be answered at once.
set answer-ctcp 3
# Set here how many msgs in how many seconds from one host constitutes
# a flood. If you set this to 0:0, msg flood protection will be disabled.
set flood-msg 5:60
# Set here how many ctcps in how many seconds from one host constitutes
# a flood. If you set this to 0:0, ctcp flood protection will be disabled.
set flood-ctcp 3:60
# This settings makes the bot cycle forever through the server list until
# it successfully connects to one.
set never-give-up 1
# This setting defines how long Eggdrop should wait before moving from one
# server to another on disconnect. If you set 0 here, Eggdrop will not wait
# at all and will connect instantly. Setting this too low could result in
# your bot being K:Lined.
set server-cycle-wait 60
# Set here how long Eggdrop should wait for a response when connecting to a
# server before giving up and moving on to next server.
set server-timeout 30
# If the number of servers on the net gets below this number, the bot
# will jump to a new server (it will assume it's on the losing end of
# a netsplit). Set this to 0 to turn off. If your bot is running on
# any major IRC network, this should probably be turned off.
set servlimit 0
# Set this to 1 if Eggdrop should check for stoned servers? (where the
# server connection has died, but Eggdrop hasn't been notified yet).
set check-stoned 1
# If you want your bot to exit the server if it receives an ERROR message,
# set this to 1.
set serverror-quit 1
# Set here the maximum number of lines to queue to the server. If you're
# going to dump large chunks of text to people over IRC, you will probably
# want to raise this. 300 is fine for most people though.
set max-queue-msg 300
# If you want Eggdrop to trigger binds for ignored users, set this to 1.
set trigger-on-ignore 0
# Allow identical messages in the mode queue?
set double-mode 1
# Allow identical messages in the server queue?
set double-server 1
# Allow identical messages in the help queue?
set double-help 1
# This optimizes the kick queue. It also traces nick changes and parts in
# the channel and changes the kick queue accordingly. There are three
# different options for this setting:
# 0 = Turn it off.
# 1 = Optimize the kick queue by summarizing kicks.
# 2 = Trace nick changes and parts on the channel and change the queue
# accordingly. For example, bot will not try to kick users who have
# already parted the channel.
# ATTENTION: Setting 2 is very CPU intensive.
set optimize-kicks 1
# If your network supports more recipients per command then 1, you can
# change this behavior here. Set this to the number of recipients per
# command, or set this to 0 for unlimited.
set stack-limit 4
thx 4 help
mfg
ice
)