Issues with DCC Chat to get bot setup

fewynmotosuwa · Post by **fewynmotosuwa** » Mon May 29, 2006 4:28 pm

(16:27:20) !Thor! ERROR no telnet port

I get that everytime I try to initate a chat session with my bot, telnet is not installed on this server so I'm pretty sure that's the issue, is there anyway around this? So I can setup the channels it joins, that's about all I need it to do so it can just run the normal TCL scripts I'm going to load.

Thanks

DragnLord · Post by **DragnLord** » Mon May 29, 2006 5:22 pm

read the docs!
read about the conf file, pay attention to the 'listen' directive

fewynmotosuwa · Post by **fewynmotosuwa** » Mon May 29, 2006 8:33 pm

DragnLord wrote:read the docs!
read about the conf file, pay attention to the 'listen' directive

The listen directive has been changed several times. Still gives the same error.

DragnLord · Post by **DragnLord** » Mon May 29, 2006 8:42 pm

ERROR no telnet port

means that the listen directive is wrong, please post what you have

Alchera · Post by **Alchera** » Mon May 29, 2006 9:38 pm

Help us to help you (and try to help yourself)

Read the above link carefully and make an attempt to resolve your DCC issue logically.

fewynmotosuwa · Post by **fewynmotosuwa** » Tue May 30, 2006 8:09 am

http://fewyn.is-a-geek.com:1205/Thor.conf there's my config very simple all directives have been changed. (Bot is hosted on another server)

I've gone through the that thread before too, I'll post the answers just so you know I'm not lying. I've set up eggdrops before and never have had this problem

1. mIRC is getting my IP correctly, as I can DCC CHAT to other bots (not hosted on this box)
2. My firewall? See above. (linksys router, I am DMZ, windows firewall off)
3. NAT-Router, See above.
4. Bot has it's ip address set correctly
5. No Firewall installed on the box whatsoever and is also connected through a linksys router that is set as the DMZ. (Different router different location)
6. See above.

DragnLord · Post by **DragnLord** » Tue May 30, 2006 8:29 am

If you want help here, I suggest posting the conf here using the code tags.
Few people will download an external file to help, and I'm not one of them.

fewynmotosuwa · Post by **fewynmotosuwa** » Tue May 30, 2006 2:49 pm

DragnLord wrote:If you want help here, I suggest posting the conf here using the code tags.
Few people will download an external file to help, and I'm not one of them.

Most browsers will just open it in the window

Unless you aren't using IE/FF/Opera/links/lynx

Post by **caesar** » Tue May 30, 2006 4:40 pm

And again, you've missed the point. Why to post it's conf file DragnLord? It's useless, since the answer had been already given. Re-read the replyes you have recived and follow the instructions.

Alchera · Post by **Alchera** » Tue May 30, 2006 6:01 pm

fewynmotosuwa wrote:Most browsers will just open it in the window Unless you aren't using IE/FF/Opera/links/lynx

All relevant information whether that be configuration files, snippets, or entire Tcl files are posted using code tags. What IE (or whatever) is able to do is irrelevant.