My eggie got G-lined for too many connections so I changed the IP and Hostname to a differnet vhost. When I tried to restart the conf file, I got this message at the end of the run ...
Eggdrop v1.6.17 (C) 1997 Robey Pointer (C) 2004 Eggheads
[18:57] --- Loading eggdrop v1.6.17 (Sat Oct 28 2006)
[17:57] Listening at telnet port 30788 (bots).
[17:57] Listening at telnet port 30798 (users).
[17:57] Module loaded: dns
[17:57] Module loaded: channels
[17:57] Module loaded: server
[17:57] Module loaded: ctcp
[17:57] Module loaded: irc
[17:57] Module loaded: transfer (with lang support)
[17:57] Module loaded: share
[17:57] Module loaded: notes (with lang support)
[17:57] Module loaded: console (with lang support)
[17:57] Module loaded: seen
[17:57] Module loaded: blowfish
[17:57] Module loaded: assoc (with lang support)
[17:57] Module loaded: wire (with lang support)
[17:57] Module loaded: uptime
[17:57] Loading netbots.tcl v4.10...
[17:57] Loaded components: botnetop, netbots
[17:57] * Invalid userfile format.
Uhg! I tried several different things, but nothing seems to work. Here's the conf file I'm using, any help would be appreciated ...
#! /home/taowine/eggdrop
# ^- This should contain a fully qualified path to your Eggdrop executable.
#
# $Id: eggdrop.conf,v 1.40 2004/08/21 22:43:27 wcc Exp $
#
##### BASIC SETTINGS #####
set username "Reisling"
set admin "TaoWine"
set network "Undernet.org"
set timezone "EST"
set offset "5"
set env(TZ) "$timezone $offset"
set my-hostname "b-e-e-r.us"
set my-ip "64.18.146.99"
addlang "english"
##### LOG FILES #####
set max-logs 5
set max-logsize 0
set quick-logs 0
set raw-log 0
logfile mco * "logs/eggdrop.log"
logfile jpk #Wine "logs/Wine.log"
set log-time 1
set keep-all-logs 0
set logfile-suffix ".%d%b%Y"
set switch-logfiles-at 300
set quiet-save 0
##### CONSOLE #####
set console "mkcobxs"
##### FILES AND DIRECTORIES #####
set userfile "Reisling.user"
set pidfile "pid.Reisling"
set sort-users 0
set help-path "help/"
set text-path "text/"
set temp-path "/tmp"
set motd "text/motd"
set telnet-banner "text/banner"
set userfile-perm 0600
##### BOTNET/DCC/TELNET #####
set botnet-nick "Reisling"
listen 30788 bots
listen 30798 users
set remote-boots 2
set share-unlinks 1
set protect-telnet 0
set dcc-sanitycheck 1
set ident-timeout 5
set require-p 1
set open-telnets 1
set stealth-telnets 0
set use-telnet-banner 1
set connect-timeout 15
set dcc-flood-thr 3
set telnet-flood 5:60
set paranoid-telnet-flood 1
set resolve-timeout 15
##### MORE ADVANCED SETTINGS #####
set ignore-time 15
set hourly-updates 00
set owner "TaoWine, FlyWine"
set notify-newusers "$owner"
set default-flags "hp"
set whois-fields "url birthday"
set die-on-sighup 0
set die-on-sigterm 1
unbind dcc n tcl *dcc:tcl
unbind dcc n set *dcc:set
set must-be-owner 1
unbind dcc n simul *dcc:simul
set max-dcc 50
set allow-dk-cmds 1
set dupwait-timeout 5
##### MODULES #####
set mod-path "modules/"
#### DNS MODULE ####
loadmodule dns
#### CHANNELS MODULE ####
loadmodule channels
set chanfile "Reisling.chan"
set force-expire 0
set share-greet 0
set use-info 1
set global-flood-chan 10:60
set global-flood-deop 3:10
set global-flood-kick 3:10
set global-flood-join 5:60
set global-flood-ctcp 3:60
set global-flood-nick 5:60
set global-aop-delay 5:30
set global-idle-kick 0
set global-chanmode "nt"
set global-stopnethack-mode 0
set global-revenge-mode 0
set global-ban-time 120
set global-exempt-time 60
set global-invite-time 60
set global-chanset {
-autoop +autovoice
-bitch +cycle
+dontkickops +dynamicbans
+dynamicexempts +dynamicinvites
-enforcebans +greet
-inactive -nodesynch
-protectfriends +protectops
-revenge -revengebot
-secret -seen
+shared +statuslog
+userbans +userexempts
+userinvites -protecthalfops
-autohalfop
}
channel add #Wine {
chanmode "+nt"
}
#### SERVER MODULE ####
loadmodule server
# What is your network?
# 0 = EFnet
# 1 = IRCnet
# 2 = Undernet
# 3 = DALnet
# 4 = +e/+I/max-modes 20 Hybrid
# 5 = Others
set net-type 2
set nick "Reisling"
set altnick "Reisling45"
set realname "Reisling"
bind evnt - init-server evnt:init_server
proc evnt:init_server {type} {
global botnick
putquick "MODE $botnick +i-ws"
}
set default-port 6668
set servers {
newyork.ny.us.undernet.org:6668
LosAngeles.CA.US.Undernet.org:6667
Sterling.VA.US.UnderNet.org:6668
sanjose.ca.us.undernet.org:6667
mesa.az.us.undernet.org:6667
Montreal.QC.CA.Undernet.org:6667
Amsterdam.NL.EU.undernet.org:6662
Amsterdam2.NL.EU.undernet.org:6661
bucharest.ro.eu.undernet.org:6660
Carouge.CH.EU.Undernet.org:7777
Diemen.NL.EU.Undernet.Org:7000
Ede.NL.EU.UnderNet.Org:6667
Elsene.Be.Eu.undernet.org:6668
graz.at.Eu.UnderNet.org:6661
Helsinki.FI.EU.Undernet.org:6668
Lelystad.NL.EU.UnderNet.Org:6667
London.UK.Eu.Undernet.Org:6666
London2.UK.EU.Undernet.Org:6664
Oslo1.NO.EU.undernet.org:6668
Oslo2.NO.EU.undernet.org:6666
Zagreb.Hr.EU.UnderNet.org:6668
}
set keep-nick 1
set strict-host 0
set quiet-reject 0
set lowercase-ctcp 1
set answer-ctcp 3
set flood-msg 5:60
set flood-ctcp 3:60
set never-give-up 1
set server-cycle-wait 60
set server-timeout 60
set servlimit 0
set check-stoned 1
set serverror-quit 1
set max-queue-msg 300
set trigger-on-ignore 0
set double-mode 1
set double-server 1
set double-help 1
set optimize-kicks 1
set stack-limit 4
### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
# This settings defines how umode +r is understood by Eggdrop. Some networks
# use +r to indicate a restricted connection. If this is your case, and you
# want your bot to leave restricted servers and jump to the next server on its
# list, then set it to 1.
#set check-mode-r 1
set nick-len 12
#### CTCP MODULE ####
loadmodule ctcp
set ctcp-mode 0
#### IRC MODULE ####
loadmodule irc
set bounce-bans 1
set bounce-exempts 0
set bounce-invites 0
set bounce-modes 0
set max-bans 30
set max-exempts 20
set max-invites 20
set max-modes 30
# Do you want to enable exempts (+e modes)?
#set use-exempts 0
# Do you want to enable invites (+I modes)?
#set use-invites 0
set kick-fun 0
set ban-fun 0
set learn-users 1
set wait-split 600
set wait-info 180
set mode-buf-length 200
#unbind msg - hello *msg:hello
#bind msg - myword *msg:hello
unbind msg - ident *msg:ident
unbind msg - addhost *msg:addhost
set opchars "@"
#set opchars "@&~"
set no-chanrec-info 0
### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
set prevent-mixing 1
### IRC MODULE - OTHER NETWORKS (net-type 5) ###
#set kick-method 1
#set modes-per-line 3
#set include-lk 1
#set use-354 0
#set rfc-compliant 1
#### TRANSFER MODULE ####
loadmodule transfer
set max-dloads 3
set dcc-block 0
set copy-to-tmp 1
set xfer-timeout 30
#### SHARE MODULE ####
loadmodule share
#set allow-resync 0
set resync-time 900
#set private-global 0
#set private-globals "mnot"
#set private-user 0
#set override-bots 0
#### COMPRESS MODULE ####
#loadmodule compress
set share-compressed 1
#set compress-level 9
#### FILESYSTEM MODULE ####
#loadmodule filesys
set files-path "/home/mydir/filesys"
set incoming-path "/home/mydir/filesys/incoming"
set upload-to-pwd 0
set filedb-path ""
set max-file-users 20
set max-filesize 1024
#### NOTES MODULE ####
loadmodule notes
set notefile "Reisling.notes"
set max-notes 50
set note-life 60
set allow-fwd 0
set notify-users 1
set notify-onjoin 1
#### CONSOLE MODULE ####
loadmodule console
set console-autosave 1
set force-channel 0
set info-party 0
#### WOOBIE MODULE ####
# loadmodule woobie
#### SEEN MODULE ####
loadmodule seen
#### BLOWFISH MODULE ####
loadmodule blowfish
#### ASSOC MODULE ####
loadmodule assoc
#### WIRE MODULE ####
loadmodule wire
#### UPTIME MODULE ####
loadmodule uptime
##### SCRIPTS #####
# source scripts/getops-3.0c.tcl
# source scripts/botnetop.tcl
source netbots/netbots.tcl
# source scripts/rssnews.tcl
# This line loads script.tcl from the scripts directory inside your Eggdrop's
# directory. All scripts should be put there, although you can place them where
# you like as long as you can supply a fully qualified path to them.
#
# source scripts/script.tcl
source scripts/alltools.tcl
source scripts/action.fix.tcl
# Use this script for Tcl and Eggdrop downwards compatibility.
# NOTE: This can also cause problems with some newer scripts.
source scripts/compat.tcl
# This script provides many useful informational functions, like setting
# users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
# extra entries.
source scripts/userinfo.tcl
loadhelp userinfo.help
Thanks a bunch
TaoWine
