This is the new home of the egghelp.org community forum.
All data has been migrated (including user logins/passwords) to a new phpBB version.


For more information, see this announcement post. Click the X in the top right-corner of this box to dismiss this message.

AllProtection.tcl (Stable: v4.8 / Beta: v4.9b4)

Support & discussion of released scripts, and announcements of new releases.
Post Reply
w
willyw
Revered One
Posts: 1203
Joined: Thu Jan 15, 2009 12:55 am

Post by willyw »

Hello Sir_FZ,

Been using AP a while now. Nice. :)
Thanks.

Is it possible that we broke bnicks global protection?
Check here: http://forum.egghelp.org/viewtopic.php?p=87649#87649
for a few posts.

Yesterday, I happened to want to enable bnicks in a channel.

In .chaninfo
looks like this now: ap:bnicks: {+ 1440 w:k:b 2}

Had a quick look at the bnicks global list, and it looked like it would cover what I needed.
Quickly tested, by joining the channel with a nick that IS in the global list.
No reaction by bot.
Waited a while.
Still nothing.

Then, just for the heck of it, put that same term in the #chan bnicks list.
Bot reacted quickly!


What do you make of it?


Thanks
User avatar
Thanhas
Op
Posts: 124
Joined: Sat Sep 02, 2006 11:14 am
Location: Ottawa, Canada

Post by Thanhas »

i am waiting for replay i am okey with they nick it is wth but its not kickin on spam please tell me how to make that kick on?
User avatar
Sir_Fz
Revered One
Posts: 3794
Joined: Sun Apr 27, 2003 3:10 pm
Location: Lebanon
Contact:

Post by Sir_Fz »

willyw wrote:Hello Sir_FZ,

Been using AP a while now. Nice. :)
Thanks.

Is it possible that we broke bnicks global protection?
Check here: http://forum.egghelp.org/viewtopic.php?p=87649#87649
for a few posts.

Yesterday, I happened to want to enable bnicks in a channel.

In .chaninfo
looks like this now: ap:bnicks: {+ 1440 w:k:b 2}

Had a quick look at the bnicks global list, and it looked like it would cover what I needed.
Quickly tested, by joining the channel with a nick that IS in the global list.
No reaction by bot.
Waited a while.
Still nothing.

Then, just for the heck of it, put that same term in the #chan bnicks list.
Bot reacted quickly!


What do you make of it?


Thanks
When a channel has a specific bnicks list, the global list is not used. So if you already had a #chan-sepcific bnicks list that did not contain the nick you've added, the bot will not react because it won't consider the global list.
Thanhas wrote:The bot dose not kick anyone on PM invite/spam to the spambot please tell me why ?
Enable ap:adv. I will not tell you how though, so don't ask me and instead look it up in the script.
User avatar
Thanhas
Op
Posts: 124
Joined: Sat Sep 02, 2006 11:14 am
Location: Ottawa, Canada

Post by Thanhas »

Hello

<(HosTer> ap:repeatl: {3:10 60 k:kb 2}
<(HosTer> ap:repeatc: {0 30 w:k:kb 2}
<(HosTer> ap:codes: {r:35 b:80 u:80 c:80 90 kb 2}
<(HosTer> ap:adv: {+ 180 kb 2}
<(HosTer> ap:antispam: {- + 10 10}
<(HosTer> ap:swear: {+ 120 kb 2}
<(HosTer> ap:pqsadv: {s:1 a:1}

Its Enabled :(
w
willyw
Revered One
Posts: 1203
Joined: Thu Jan 15, 2009 12:55 am

Post by willyw »

Sir_Fz wrote:
When a channel has a specific bnicks list, the global list is not used. So if you already had a #chan-sepcific bnicks list that did not contain the nick you've added, the bot will not react because it won't consider the global list.
Aha. :)
Tried it. Simply deleted the entries in the channel specific bnicks list, and it immediately detected one of the nicks in the global list.

If ever knew that before, I'd forgotten it.

Thanks!
w
willyw
Revered One
Posts: 1203
Joined: Thu Jan 15, 2009 12:55 am

Post by willyw »

Hello Sir_Fz:


The IRC server accepts a command:
/msg chanserv access #chan list
and responds with a notice reply to my irc client program, listing the users
on the SOP, AOP, VOP list.

From the partyline, if I send:
.msg chanserv access #chan list
I get a few of the lines of response, appearing in the partyline, then:
<botnick> [16:49] Flood from @theIRCserver.com! Placing on ignore!
<botnick> [16:49] AP: Private botnet flood detected. Temporarly stopped answering recieved data.

And I'm not finding what I need to change to adjust that.

For what it is worth, 15 minutes later, I see it expire.

Also, possibly pertinent:
http://forum.egghelp.org/viewtopic.php? ... start=1005
that I felt I should mention... just in case it is meaningful here.

If you want some info, on any settings in chaninfo, or from the config in the script, let me know and I'll get you whatever info you need.

Thanks
User avatar
Sir_Fz
Revered One
Posts: 3794
Joined: Sun Apr 27, 2003 3:10 pm
Location: Lebanon
Contact:

Post by Sir_Fz »

Add *!*@theIRCserver.com to your eggdrop with +f and it'll be exempted.
w
willyw
Revered One
Posts: 1203
Joined: Thu Jan 15, 2009 12:55 am

Post by willyw »

Thank you for the very fast reply.
Sir_Fz wrote:Add *!*@theIRCserver.com to your eggdrop with +f and it'll be exempted.
That does work.
It seems to me to a very broad hostmask though.
Experimented.
Using *!*services@theIRCserver.com seems to work too, and I suppose it narrows it down some.

(By the way, I just made up a user, with a totally dreamed up handle. Then added the host. That is what you meant for me to do, right? )

Is there no other way to accomplish this though? No settings within AP?
and, what was causing it?


Thanks
User avatar
Thanhas
Op
Posts: 124
Joined: Sat Sep 02, 2006 11:14 am
Location: Ottawa, Canada

Post by Thanhas »

Hello Sir_Fz i am waiting for my replay the spam bot dose not work just join part please tell me the way to make it work?

Thanks
User avatar
Sir_Fz
Revered One
Posts: 3794
Joined: Sun Apr 27, 2003 3:10 pm
Location: Lebanon
Contact:

Post by Sir_Fz »

willyw wrote:(By the way, I just made up a user, with a totally dreamed up handle. Then added the host. That is what you meant for me to do, right? )

Is there no other way to accomplish this though? No settings within AP?
and, what was causing it?
Yes that's right, you create a new user with that host and give it the +f user-flag. There is no other way, but why are you worried? the IRC services' hostmask cannot be spoofed or used in abusive actions (otherwise, what kind of network would that be?). Just make sure you set a password to that user. The cause of the ignore was simply because of the settings you have set for private floods.
Thanhas wrote:the spam bot dose not work just join part please tell me the way to make it work?
Add the words using .ap:add adwords <chan/global> <words...>
w
willyw
Revered One
Posts: 1203
Joined: Thu Jan 15, 2009 12:55 am

Post by willyw »

Sir_Fz wrote:
willyw wrote:(By the way, I just made up a user, with a totally dreamed up handle. Then added the host. That is what you meant for me to do, right? )

Is there no other way to accomplish this though? No settings within AP?
and, what was causing it?
Yes that's right, you create a new user with that host and give it the +f user-flag. There is no other way, but why are you worried? the IRC services' hostmask cannot be spoofed or used in abusive actions (otherwise, what kind of network would that be?).
True.
Just make sure you set a password to that user.

What is the significance of setting a pw?
The cause of the ignore was simply because of the settings you have set for private floods.
Excellent!
Which settings, and I will copy them here.
See.... I thought I had them all set off. ....I must be missing something.


Thanks
J
Jade
Voice
Posts: 8
Joined: Wed Oct 28, 2009 3:58 am

Post by Jade »

i need to know how to identify for the anti spambot nick. I am using latest version of allprotection4.6b9.

My antispam bot nick is registered, and it get changed after a min, as i there is no way to identify to it.

Help/response will be appreciated.
User avatar
Sir_Fz
Revered One
Posts: 3794
Joined: Sun Apr 27, 2003 3:10 pm
Location: Lebanon
Contact:

Post by Sir_Fz »

willyw wrote:Excellent!
Which settings, and I will copy them here.
See.... I thought I had them all set off. ....I must be missing something.


Thanks
Everything under

Code: Select all

###########################
#   PRIVATE PROTECTIONS   #
###########################
is related to private floods.
User avatar
Sir_Fz
Revered One
Posts: 3794
Joined: Sun Apr 27, 2003 3:10 pm
Location: Lebanon
Contact:

Post by Sir_Fz »

Jade wrote:i need to know how to identify for the anti spambot nick. I am using latest version of allprotection4.6b9.

My antispam bot nick is registered, and it get changed after a min, as i there is no way to identify to it.

Help/response will be appreciated.
This feature does not currently exist. I suggest you add the anti-spam bot's host to its nickname's access list

Edit: You can also make it identify on connect by adding this line:

Code: Select all

putdcc $idx "NickServ :identify $antispam(cnick) <password>"
This can be modified to whatever identification syntax you use

After these lines in procedure antispambot:

Code: Select all

"001" {
   putlog "\002AP\002: AntiSpamBot: Connected and registered as $antispam(cnick)."
   set antispam(pong) 1; set antispam(idx) $idx
Edit2: "ChanServ" to "NickServ"
Last edited by Sir_Fz on Sun Nov 15, 2009 11:42 am, edited 1 time in total.
J
Jade
Voice
Posts: 8
Joined: Wed Oct 28, 2009 3:58 am

Post by Jade »

Sir_Fz

I tried to identify via the method you mentioned but i didnt work for me. Here is what i did in the script tcl file.


"001" {
putlog "\002AP\002: AntiSpamBot: Connected and registered as $antispam(cnick)."
set antispam(pong) 1; set antispam(idx) $idx
putdcc $idx "NickServ :identify $antispam(cnick) <mypassword>"
Post Reply