any one can help me to modify active chatter script
im using unreal ircd and in it i cant use like this mode
example : /mode #chan +v-k nick msg
i need it like this
Bot sets mode: +v-k good active.user
but in unreal only like this
Bot sets mode: +v good
how to make the bot say any word after the voice mode
this is the script
Code: Select all
# $Id: activechatter.tcl, v3.80.b eggdrop-1.6.18 23/02/2009 10:11:56 Exp $
# Begin - Active Chatter v3.80.b [activechatter.tcl]
# Build date: 6th August 2007
# Last Modified: 23rd February 2009
# Copyright © 1998-2009 awyeah (awesomeawyeah@gmail.com)
# This TCL script is designed to work with eggdrop v1.6.17 or higher
#########################################################################
# Active Chatter 3.80.b #
# #
# #
# Author: awyeah 23rd February 2009 #
# Email: awesomeawyeah@gmail.com Build version 3.80.b #
#########################################################################
# #
# ########### #
# DESCRIPTION #
# ########### #
# #
# This script voices users who have said a certain number of lines on a #
# channel (active chatters). Additionally, it devoices users who are #
# idling for more than a certain amount of time on a channel (unactive #
# chatters). #
# #
#########################################################################
# #
# ############ #
# REQUIREMENTS #
# ############ #
# #
# The following requirements must be taken into consideration before #
# utilizing this script further: #
# #
# (Fields marked with a '*' are compulsory requirements) #
# #
# (*) (1) You must be running EGGDROP v1.6.17 or higher. #
# (*) (2) You must have TCL v8.4 or higher installed on the system. #
# #
# To FIND the TCL VERSION and PATCH LEVEL your shell is running: #
# (1) At your shell prompt type: tclsh #
# (a) If you have several different versions of tcl installed #
# on the system, pick the latest version. E.g: tclsh8.3, #
# tclsh8.4 which is installed from the given list. #
# (i) At shell prompt type: tclsh8.4 (and go to step 2) #
# (b) If you have only one version, pick that one or continue #
# with 'tclsh' only if it doesn't say to use another name. #
# (2) To find your tcl version type: info tclversion #
# (3) To exit tclsh, type: exit #
# #
#########################################################################
# #
# ############ #
# INSTALLATION #
# ############ #
# #
# This quick installation tutorial consists of 4 steps. Please follow #
# all steps correctly in order to setup your script. #
# #
# (1) Upload the file activechatter.tcl in your eggdrop '/scripts' #
# folder along with your other scripts. #
# #
# (2) OPEN your eggdrops configuration (.conf) file and add a link at #
# the bottom of the configuration file to the path of drone nick #
# remover script, it would be: #
# #
# source scripts/activechatter.tcl #
# #
# #
# (3) SAVE your bots configuration file. #
# #
# (4) REHASH and RESTART your bot. #
# #
#########################################################################
# #
# ######## #
# VERSIONS #
# ######## #
# #
# v3.80.b - Fixed bugs reported by users thanks to "speechless" from #
# (04/02/09) the egghelp forum. #
# - Fixed a bug in the autovoice:users and #
# autovoice:devoice:idlers procedure for $nickchan. #
# - Fixed declaration of $chan in autovoice:devoice:idlers #
# procedure. #
# - Added configuration settings to set user specific mode #
# settings for displaying active and idle chatters. #
# #
# v3.66.b - Fixed some bugs and errors reported. #
# (20/09/07) #
# #
# v3.47.b - First public release. #
# (07/08/07) #
# #
#########################################################################
# #
# ######## #
# CONTACTS #
# ######## #
# #
# (*) For any suggestions, comments, questions or bugs reports, feel #
# free to email me at: #
# #
# awesomeawyeah@gmail.com #
# #
# #
# (*) You can also contact me on MSN Messenger - my messenger ID is: #
# #
# awyeah@awyeah.org #
# #
# #
# (*) You can also catch me on The DALnet Network: #
# #
# /server irc.dal.net:6667, Nick: awyeah #
# Channels: #awyeah, #eggdrops #
# #
#########################################################################
# #
# ######### #
# COPYRIGHT #
# ######### #
# #
# This program is a free software; you can distribute it under the #
# terms of the GNU General Public License under Section 1 as published #
# by the Free Software Foundation; either version 2 of the license, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# WARNING: #
# This program is protected by copyright law and international #
# treaties. Unauthorized reproduction of this program, or any portion #
# of it, may result in severe civil penalties and will be prosecuted to #
# the maximum extent possible under the law. #
# #
#########################################################################
# #
# ######### #
# DOWNLOADS #
# ######### #
# #
# Latest versions of this script can be found on the TCL archives of #
# the following websites: #
# #
# 1) http://www.egghelp.org/ #
# 2) http://www.tclscript.com/ #
# 3) http://channels.dal.net/awyeah/ #
# #
#########################################################################
##############################################
### Start configuring variables from here! ###
##############################################
#Set the channels you would like this script to work on.
#USAGE: [1/2] (1=User defined channels, 2=All channels the bot is on)
set autovoice(chantype) "2"
### SET THIS ONLY IF YOU HAVE SET THE PREVIOUS SETTING TO '1' ###
#Set the channels below on which this script should work. Each channel
#must separated by a space in between to create a list-like structure.
#USAGE: set autovoice(channels) "#channel1 #channel2 #mychannel"
set autovoice(chans) "#mychannel #yourchannel"
#Set the 'number of lines' here after which a user will be voiced for being
#an ACTIVE CHATTER. Only channel messages will be counted for activity.
set autovoice(lines) "25"
#Set the time here in 'minutes' after which you would like to devoice idlers (UNACTIVE
#CHATTERs). Users idling for more than this number of minute(s) will be devoiced.
######################################################################################
#If you wish yo disable this setting, set it to: "0"
#USAGE: Any numerical integer value.
set autovoice(dvtime) "10"
### SET THIS ONLY IF YOU HAVE ENABLED (UNACTIVE CHATTER) DEVOICING FOR IDLERS ###
#Set the time here in 'minutes' after which you would continuously like to check
#channel voices for idling. It is better to set this value low for good accuracy.
#USAGE: Any numerical integer value.
set autovoice(dvcheck) "2"
### ACTIVE-CHATTER (VOICE) EXEMPT NICKS ###
#Set the list of nicks here which you would like to be exempted from being
#autovoiced by the script. Place separate each entry by placing it in a new line.
##################################################################################
#If you do not have any nick to exempt, then: set autovoice(avexempt) {}
set autovoice(avexempt) {
nick1:#channel1
nick2:#channel2
nick3:#channel3
}
### UNACTIVE-CHATTER (DEVOICE) EXEMPT NICKS ###
#Set the list of nicks here which you would like to be exempted from being
#devoiced by the script. Place separate each entry by placing it in a new line.
################################################################################
#If you do not have any nick to exempt, then: set autovoice(dvexempt) {}
set autovoice(dvexempt) {
nick1:#channel1
nick2:#channel2
nick3:#channel3
}
### SET THE TEXT TO DISPLAY IN THE +V (VOICING) MODE ###
#Set the text to display while voicing the active chatters. This text will be
#displayed when removing the channel key (mode: -k). Control codes such as
#color/bold/underline/reverses can also be used in the string.
#Please see: http://tclhelp.net/#faqcolor for more information on control codes.
################################################################################
set autovoice(voicemode) "\0032Active.\00312chatter"
### SET THE TEXT TO DISPLAY IN THE -V (DE-VOICING) MODE ###
#Set the text to display while devoicing the idle chatters. This text will be
#displayed when removing the channel key (mode: -k). Control codes such as
#color/bold/underline/reverses can also be used in the string.
#Please see: http://tclhelp.net/#faqcolor for more information on control codes.
################################################################################
set autovoice(devoicemode) "\0032Unactive.\00312chatter"
#############################################################
### Congratulations! Script configuration is now complete ###
#############################################################
##############################################################################
### Don't edit anything else from this point onwards even if you know tcl! ###
##############################################################################
set autovoice(auth) "\x61\x77\x79\x65\x61\x68"
set autovoice(ver) "v3.80.b"
bind pubm - "*" autovoice:users
bind join - "*" autovoice:erase:record
if {$autovoice(dvtime) > 0} {bind time - "*" autovoice:devoice:idlers}
proc autovoice:users {nick uhost hand chan text} {
global autovoice voice
if {($autovoice(chantype) == 1) && ([lsearch -exact [split [string tolower $autovoice(chans)]] [string tolower $chan]] == -1)} { return 0 }
if {[isbotnick $nick] || [isop $nick $chan] || [isvoice $nick $chan]} { return 0 }
set exemptlist [list]
foreach nickchan $autovoice(avexempt) {
lappend exemptlist $nickchan
}
if {[llength $exemptlist] > 0} {
foreach nickchan $exemptlist {
if {[string equal -nocase $nickchan $nick] || ([string equal -nocase [lindex [split $nickchan :] 0] $nick] && [string equal -nocase [lindex [split $nickchan :] 1] $chan])} {
return 0
}
}
}
set user [split [string tolower $nick:$chan]]
if {![info exists voice($user)] && ![isvoice $nick $chan] && ![isop $nick $chan]} {
set voice($user) 0
} elseif {[info exists voice($user)] && ([expr $voice($user) + 1] >= $autovoice(lines)) && ![isop $nick $chan] && ![isvoice $nick $chan]} {
utimer 3 [list autovoice:delay $nick $chan]
unset voice($user)
} elseif {[info exists voice($user)]} {
incr voice($user)
}
}
proc autovoice:delay {nick chan} {
global autovoice voice
set user [split [string tolower $nick:$chan]]
if {[botisop $chan] && [onchan $nick $chan] && ![isop $nick $chan] && ![isvoice $nick $chan]} {
pushmode $chan +v $nick
set voiced($user) 1
}
if {[info exists voiced($user)]} {
pushmode $chan -k $autovoice(voicemode)
flushmode $chan
}
}
proc autovoice:erase:record {nick uhost hand chan} {
global autovoice voice
if {($autovoice(chantype) == 1) && ([lsearch -exact [split [string tolower $autovoice(chans)]] [string tolower $chan]] == -1)} { return 0 }
if {[isbotnick $nick]} { return 0 }
set user [split [string tolower $nick:$chan]]
if {[info exists voice($user)]} { unset voice($user) }
}
proc autovoice:devoice:idlers {m h d mo y} {
global autovoice voice
if {([scan $m %d]+([scan $h %d]*60)) % $autovoice(dvcheck) == 0} {
switch -exact $autovoice(chantype) {
1 { set chans [split $autovoice(chans)] }
2 { set chans [channels] }
default { return 0 }
}
foreach chan $chans {
set chan [string tolower $chan]
foreach user [chanlist $chan] {
set user [split [string tolower $user]]
if {[info exists exempt]} { unset exempt }
if {[botonchan $chan] && ![isbotnick $user] && ![isop $user $chan] && [isvoice $user $chan]} {
set exemptlist [list]
foreach nickchan $autovoice(dvexempt) {
lappend exemptlist $nickchan
}
if {[llength $exemptlist] > 0} {
foreach nickchan $exemptlist {
if {[string equal -nocase $nickchan $user] || ([string equal -nocase [lindex [split $nickchan :] 0] $user] && [string equal -nocase [lindex [split $nickchan :] 1] $chan])} {
set exempt 1; break
}
}
}
if {[botonchan $chan] && ![info exists exempt] && ([getchanidle $user $chan] >= $autovoice(dvtime))} {
pushmode $chan -v $user
if {![info exists devoice($chan)]} {
set devoice($chan) 1
}
} else {
continue
}
} else {
continue
}
}
if {[info exists devoice($chan)]} {
pushmode $chan -k $autovoice(devoicemode)
flushmode $chan
}
}
}
}
if {![string equal "\x61\x77\x79\x65\x61\x68" $autovoice(auth)]} { set autovoice(auth) \x61\x77\x79\x65\x61\x68 }
putlog "\002Active Chatter $autovoice(ver)\002 by \002$autovoice(auth)\002 has been loaded successfully."
