This is the new home of the egghelp.org community forum.
All data has been migrated (including user logins/passwords) to a new phpBB version.


For more information, see this announcement post. Click the X in the top right-corner of this box to dismiss this message.

botnet link problem

General support and discussion of Eggdrop bots.
Post Reply
m
moro
Voice
Posts: 1
Joined: Wed Mar 01, 2006 12:46 pm

botnet link problem

Post by moro »

hello i apeald to you coz i dont know what to do anymore ... i cant do more than this ...
first il show you the eggdrop config file to see


this is the config file for the hubboot |RoGuard:


loadmodule dns
loadmodule channels
loadmodule server
loadmodule console
loadmodule ctcp
loadmodule irc
loadmodule blowfish
loadmodule uptime
loadmodule share
loadmodule transfer

set botnetnick "wody"
set username "moro"
set nick "|RoGuard"
set altnick "|R0Guard"

set realname "moro power"

set my-ip "86.107.129.7"

listen 4991 all

set owner "moro"
set admin "moro"
set chanfile "roguard.chan"
set userfile "roguard.user"

set default-port 6667
set servers {
eu.undernet.org:6667
us.undernet.org:6667
}

set net-type 2
set network "Undernet"
set timezone "UTC+2"
set offset "-2"

set hourly-updates 28
set help-path "help/"
set text-path "text/"
set temp-path "logs/"
set motd "text/motd"
set mod-path "modules/"
set telnet-banner "text/banner"

set nick-len 12
set keep-nick 1
set strict-host 1
set never-give-up 1
set server-cycle-wait 60
set server-timeout 120
set servlimit 0
set check-stoned 1
set learn-users 0
set max-logs 5
set max-logsize 0
set quick-logs 0
set raw-log 0
logfile mco * "logs/eggdrop.log"
logfile jpk #tatu "logs/tatu.log"
set log-time 1
set keep-all-logs 0
set logfile-suffix ".%d%b%Y"
set switch-logfiles-at 300
set quiet-save 0
set sort-users 0
set remote-boots 2
set share-unlinks 1
set ident-timeout 5
set connect-timeout 10
set dcc-flood-thr 3
set telnet-flood 5:60
set paranoid-telnet-flood 1
set resolve-timeout 15
set ignore-time 15
set notify-newusers ""
set default-flags "NnfoHPX"
set must-be-owner 1
set max-dcc 50
set allow-dk-cmds 1
set dupwait-timeout 5
set use-info 1

set global-aop-delay 5:30
set global-chanmode "nt"
set global-stopnethack-mode 0
set global-revenge-mode 0
set global-ban-time 30

set global-chanset {
-autoop -autovoice
-bitch +cycle
+dontkickops +dynamicbans
+dynamicexempts +dynamicinvites
-enforcebans +greet
-inactive -nodesynch
-protectfriends +protectops
-revenge -revengebot
-secret -seen
+shared +statuslog
+userbans +userexempts
+userinvites -protecthalfops
-autohalfop
}


##### SCRIPTS #####
set console "mco"
source scripts/alltools.tcl
source scripts/action.fix.tcl
source scripts/compat.tcl



source scripts/bseen1.4.2.tcl
source scripts/optools.tcl
source scripts/noctcp.tcl
source scripts/repeat.tcl



ANd this is the egg config file for the leaf bot: |Rolinux

loadmodule dns
loadmodule channels
loadmodule server
loadmodule console
loadmodule ctcp
loadmodule irc
loadmodule blowfish
loadmodule uptime

set botnetnick "linux"
set username "moro"
set nick "|RoLinux"
set altnick "|R0L1nux"

set realname "moro power"

set my-ip "66.252.13.25"

listen 4996 all

set owner "moro"
set admin "moro"
set chanfile "rolinux.chan"
set userfile "rolinux.user"

set default-port 6667
set servers {
eu.undernet.org:6667
us.undernet.org:6667
}

set net-type 2
set network "Undernet"
set timezone "UTC+2"
set offset "-2"

set hourly-updates 28
set help-path "help/"
set text-path "text/"
set temp-path "logs/"
set motd "text/motd"
set mod-path "modules/"
set telnet-banner "text/banner"

set nick-len 12
set keep-nick 1
set strict-host 1
set never-give-up 1
set server-cycle-wait 60
set server-timeout 120
set servlimit 0
set check-stoned 1
set learn-users 0
set max-logs 5
set max-logsize 0
set quick-logs 0
set raw-log 0
logfile mco * "logs/eggdrop.log"
#logfile jpk #tatu "logs/tatu.log"
set log-time 1
set keep-all-logs 0
set logfile-suffix ".%d%b%Y"
set switch-logfiles-at 300
set quiet-save 0
set sort-users 0
set remote-boots 2
set share-unlinks 1
set ident-timeout 5
set connect-timeout 10
set dcc-flood-thr 3
set telnet-flood 5:60
set paranoid-telnet-flood 1
set resolve-timeout 15
set ignore-time 15
set notify-newusers ""
set default-flags "NnfoHPX"
set must-be-owner 1
set max-dcc 50
set allow-dk-cmds 1
set dupwait-timeout 5
set use-info 1

set global-aop-delay 5:30
set global-chanmode "nt"
set global-stopnethack-mode 0
set global-revenge-mode 0
set global-ban-time 30

set global-chanset {
-autoop -autovoice
-bitch +cycle
+dontkickops +dynamicbans
+dynamicexempts +dynamicinvites
-enforcebans +greet
-inactive -nodesynch
-protectfriends +protectops
-revenge -revengebot
-secret -seen
+shared +statuslog
+userbans +userexempts
+userinvites -protecthalfops
-autohalfop
}


##### SCRIPTS #####
set console "mco"
source scripts/alltools.tcl
source scripts/action.fix.tcl
source scripts/compat.tcl




ok

no i will show you ho i configured the botnet

i folow the instructions on the www.egghelp.org/enhace.html or what was called and this is what i got

first let me present a mIRC whois of the bots

|RoGuard is moro@Marius.O-r-g.Us * moro power
|RoGuard on @#tatu
|RoGuard using *.undernet.org The Undernet Underworld
|RoGuard is logged in as wody
|RoGuard End of /WHOIS list.

the dns for Marius.O-r-g.Us is 86.107.129.7

now this is the whois info for the leafbot |RoLinux

|RoLinux is moro@no.25.has.no.host.[censored].opyum.us * moro power
|RoLinux on #tatu
|RoLinux using *.undernet.org The Undernet Underworld
|RoLinux is logged in as L0L
|RoLinux End of /WHOIS list.

the dns for no.25.has.no.host.[censored].opyum.us is 66.252.13.25

both of the eggdrops are 1.6.17 and they two run on the same shell server

on the hub bott ( |RoGuard) i typed:

.+bot linux 66.252.13.25:4996
.+host linux no.25.has.no.host.[censored].opyum.us
.chattr linux +fo
.botattr linux |+s #tatu

on the leaf boot ( |RoLinux) i typed

.+bot wody 86.107.129.7:4991
.+host wody Marius.O-r-g.Us
.chattr wody +fo
.botattr wody +p
.botattr wody +g
.botattr wody +h

now when i preformed a whois of the bots on evry each bot this is what showed me

whois of the leafbot (|Rolinux) from the hubbot (|roguard):

[19:02:00] <moro`> .whois linux
[19:02:00] <|Roguard> [00:59] #moro`# whois linux
[19:02:00] <|Roguard> HANDLE PASS NOTES FLAGS LAST
[19:02:00] <|Roguard> linux no 0 bflo never (nowhere)
[19:02:00] <|Roguard> HOSTS: *!*@no.25.has.no.host.[censored].opyum.us
[19:02:00] <|Roguard> BOT FLAGS: s
[19:02:00] <|Roguard> ADDRESS: 66.252.13.25
[19:02:00] <|Roguard> users: 4996, bots: 4996

and this is the whois for the hubbot preformed from the leaf bot (|rolinux):

.whois wody
[01:03] #moro# whois wody
HANDLE PASS NOTES FLAGS LAST
wody no 0 bflo never (nowhere)
BOT FLAGS: ghp
ADDRESS: 86.107.129.7
users: 4991, bots: 4991
HOSTS: *!*@Marius.O-r-g.Us

ok now here is the problem ....
when i typed .link linux from the hub bot it gives me (many examples) like this

[19:02:04] <|roguard> [01:00] @#tatu (+tnl 28) : [m/20 o/2 h/0 v/1 n/17 b/0 e/- I/-]
[19:03:03] <|roguard> [01:01] Telnet connection: no.25.has.no.host.[censored].opyum.us/53547
[19:04:04] <|roguard> [01:02] Telnet connection: no.25.has.no.host.[censored].opyum.us/53954
[19:05:03] <|roguard> [01:03] Telnet connection: no.25.has.no.host.[censored].opyum.us/54316
[19:06:04] <|roguard> [01:04] Telnet connection: no.25.has.no.host.[censored].opyum.us/53155
[19:06:38] <|roguard> [01:04] Telnet connection: no.25.has.no.host.[censored].opyum.us/53376

whyyy why it wont connect
sometimes it saying that handle leinght is 12 charachters and the handle is wody witch is 4
i don't know how this is happening ... it must be an error on the server thats hosting my bots or maybe the archive is
coz i tryed to link to another bot from another server and it work ... but only from the same servere it wont link

pls hellp me

best regards
User avatar
dusk
Halfop
Posts: 91
Joined: Sun Mar 06, 2005 7:25 pm
Location: Belgium

Post by dusk »

Your second config-file doesn't have the share and transfer module enabled as I see...
Add 'loadmodule share' and 'loadmodule transfer' to your second config.



GRTZ
User avatar
Alchera
Revered One
Posts: 3344
Joined: Mon Aug 11, 2003 12:42 pm
Location: Ballarat Victoria, Australia
Contact:

Post by Alchera »

dusk wrote:Your second config-file doesn't have the share and transfer module enabled as I see...
Add 'loadmodule share' and 'loadmodule transfer' to your second config.



GRTZ
Nothing at all to do with linking.

@ moro: Read very carefully Enhancing Your Eggdrop.
Add [SOLVED] to the thread title if your issue has been.
Search | FAQ | RTM
User avatar
dusk
Halfop
Posts: 91
Joined: Sun Mar 06, 2005 7:25 pm
Location: Belgium

Re: botnet link problem

Post by dusk »

moro wrote: .botattr linux |+s #tatu
-
.botattr wody +g
He needs it anyway...so why not giving additional help?

GRTZ
User avatar
Alchera
Revered One
Posts: 3344
Joined: Mon Aug 11, 2003 12:42 pm
Location: Ballarat Victoria, Australia
Contact:

Re: botnet link problem

Post by Alchera »

dusk wrote:
moro wrote: .botattr linux |+s #tatu
-
.botattr wody +g
He needs it anyway...so why not giving additional help?

GRTZ
He has been given "additional" help (via the link provided) and his post references linking.

Topic = botnet link problem

The link given will also solve his future problem of sharing user files (if that is what the user wishes).
Add [SOLVED] to the thread title if your issue has been.
Search | FAQ | RTM
Post Reply