.chattr are not working

sandberg · Post by **sandberg** » Tue Sep 21, 2004 5:17 am

Hi.. (again)

I searched the forum for similar errors and found one, but it didnt
say the solution.

I try to change the .chattr to +o to the bot. But it says "What? You
need '.help'". And yes, I am the master of the bot.

Code: Select all

<GlassBil> .chattr Stacie +o
<Spears> What?  You need '.help'

<GlassBil> .whois GlassBil
<Spears> HANDLE    PASS NOTES FLAGS           LAST
<Spears> GlassBil  yes      0 hjlmnoptx       10:47 (partyline)

KevKev · Post by **KevKev** » Tue Sep 21, 2004 7:07 am

check .whom to make sur eyou are logge dinto the bot as the user you are expecting to be logged in.

I know this is a long shot but it's certianly something that would cause this sort of symptom.

sandberg · Post by **sandberg** » Tue Sep 21, 2004 7:13 am

Code: Select all

13:12:26 <GlassBil> .whom
13:12:26 <Spears> [13:12] #GlassBil# whom
13:12:26 <Spears>  Nick        Bot        Host
13:12:26 <Spears> ----------   ---------  --------------------
13:12:26 <Spears> *GlassBil    Britney    glassbil@213.214.230.10
13:12:26 <Spears> Total users: 1

YooHoo · Post by **YooHoo** » Tue Sep 21, 2004 2:08 pm

try .match Glassbil in your bot, to make sure you are being recognized as the owner/master. You also might wish to type .chattr Glassbil +f... owner/masters should have the +f friend flag as well as the rest of the alphabet

sandberg · Post by **sandberg** » Tue Sep 21, 2004 3:55 pm

Code: Select all

21:53:57 <GlassBil> .match GlassBil
21:53:57 <Stacie> [21:53] #GlassBil# match GlassBil
21:53:57 <Stacie> *** Matching 'GlassBil':
21:53:57 <Stacie> HANDLE    PASS NOTES FLAGS           LAST
21:53:57 <Stacie> GlassBil  yes      0 hjlmnoptx       21:53 (partyline)
21:53:57 <Stacie>   HOSTS: *!glassbil@213.214.230.*, -telnet!*@*
21:53:57 <Stacie> --- Found 1 match.
21:54:06 <GlassBil> .chattr GlassBil +f
21:54:06 <Stacie> What?  You need '.help'
21:54:19 <GlassBil> .chattr Britney +o
21:54:19 <Stacie> What?  You need '.help'

Alchera · Post by **Alchera** » Tue Sep 21, 2004 4:41 pm

You may want to remove -telnet!*@* from your host on the bot as it's a risk. Anyone using the nick -telnet will be recognised as owner/master.

As for that error, you certainly are not being recognised as having the access the flags indicate. Re-check the bots configuration file and use Setting up an Eggdrop as a comparison, you may have just managed to have disabled something. I imagine you are using '/dcc Spears chat' which indicates you are recognised.

lilGTO · Post by **lilGTO** » Tue Sep 21, 2004 5:18 pm

I don't know if this is because of the difference in versions but when i do a .match <myhandle> on all my bots...just before the HOST and right after the actual handle I am showing the room the bot is in...... ie. #currentroom with a time just to the right of it.... Don't know if this has anything to do with this but it appears to me his bot is not in a room....

Thanks

sandberg · Post by **sandberg** » Fri Sep 24, 2004 7:23 am

I can't find anything wrong in the config...

Code: Select all

13:12:32 <GlassBil> .channel #GlassBil
13:12:32 <Stacie> [13:12] #GlassBil# (#GlassBil) channel
13:12:32 <Stacie> Channel #GlassBil, 27 members, mode +pstnl 32:
13:12:32 <Stacie> Channel Topic: http://lan.delarium.se - NU! :: http://delarium.mine.nu/temp/disko-lan.txt
13:12:32 <Stacie> (n = owner, m = master, o = op, d = deop, b = bot)
13:12:32 <Stacie>  NICKNAME  HANDLE     JOIN  IDLE  USER@HOST
13:12:32 <Stacie> @Stacie    Stacie    13:11 b     <- it's me!
13:12:32 <Stacie> @Spears    Britney    ---  b      britney@213.214.230.10
13:12:32 <Stacie> @Minogue0  Dannii     ---  b      dannii@213.214.230.10
13:12:32 <Stacie> @Minogue   Kylie      ---  b      kylie@213.214.230.10
13:12:32 <Stacie> @Aguilera  Christina  ---  b      christina@213.214.230.10
13:12:32 <Stacie> @GlassBil  GlassBil   ---  N      glassbil@213.214.230.10

Dont know if there's any diffrence of N and n. How do I change those (GlassBil is the only user on the bots)? And how do I make myself master?

And the bot recognize me:

Code: Select all

13:19:46 <GlassBil> .whois GlassBil
13:19:46 <Stacie> [13:19] #GlassBil# whois GlassBil
13:19:46 <Stacie> HANDLE    PASS NOTES FLAGS           LAST
13:19:46 <Stacie> GlassBil  yes      0 hjlmnoptx       13:09 (@Britney)
13:19:46 <Stacie>   HOSTS: *!glassbil@213.214.230.*, -telnet!*@*

I want to use telnet because sometimes I use it on the server in case they dont join any server. But I could change the host for telnet so your happy..

spock · Post by **spock** » Fri Sep 24, 2004 8:16 am

make sure that chattr is not unbound or rebound to some non-standard procedure requiring additional flags

.binds dcc all

EDIT: *all*

sandberg · Post by **sandberg** » Fri Sep 24, 2004 1:33 pm

spock wrote:make sure that chattr is not unbound or rebound to some non-standard procedure requiring additional flags

.binds dcc

Your right! I cant find chattr in that list. How do I fix that?

Alchera · Post by **Alchera** » Fri Sep 24, 2004 6:09 pm

chattr is a core module command.

Comment out all scripts you have added to your bot conf file and restart the bot and then try the command again. If it works then you need to isolate the script that is causing the problem.

sandberg · Post by **sandberg** » Sun Sep 26, 2004 6:03 am

I disabled netbots.tcl then it worked to chattr the other users.
Dont know whats wrong in the netbots config. But thats maby
not a question for this room in the forum. Its maby better to
make a new thread in the slenox script forum.

Thanks for all the help!

spock · Post by **spock** » Sun Sep 26, 2004 6:12 am

if you are unable to locate where the script unbinds chattr,
append this line to your config

bind dcc m|m chattr *dcc:chattr

EDIT; netbots might be employing a "bind filt" if you are unable to find the unbind

egghelp/eggheads community

.chattr are not working

.chattr are not working

Re:.chattr are not working

Re:.chattr are not working