TVRage.com Schedule Script (Latest: 2.0)

GaveUp · Post by **GaveUp** » Fri Feb 01, 2008 11:14 pm

Does this happen at any time of the day? My first guess is that, under the assumption this happens only near the end/start of the day, the time zone adjustment value needs to be adjusted.

If it happens at any time of the day then I'd doubt check bindings in the config.

If all else fails please post some more information. Which version are you using, mine or rosc's and which version number?

NathP · Post by **NathP** » Mon Feb 04, 2008 1:38 am

I happens anytime of the day, I know my time zone is correct, I've changed my commands in tvrage.conf to !today and !tommorrow and its still doing it, both say todays listings

I'm using the tvrage.rosc.003.tar.bz2 release with Windrop 1.6.18

HowlinPsycho · Post by **HowlinPsycho** » Mon Apr 21, 2008 4:36 am

Windrop is updated with dict 8.5.2

01.04.2008 - updated compilations instructions
- updated compilations tools (Tcl 8.5.2)

Script works nicely now

Robertus · Post by **Robertus** » Wed May 21, 2008 6:31 pm

i have a little problem

some days ago the script worked without problem, but now i have an error:

Lost - Premiered: (ABC) 2004 (USA) - Class: {%%classification%%} Genre: Action | Adventure | Drama | Mystery ·

the Class ins't correct.. why?

can you help me ?

thanks in advance

GaveUp · Post by **GaveUp** » Wed May 21, 2008 7:04 pm

For that particular show, Lost, the Classification is not a returned field from the query. You can check this for yourself by visiting:

Code: Select all

http://www.tvrage.com/quickinfo.php?show=Lost

To handle this properly you should create your own theme that and modify the theme appropriately to handle conditional variables. See the default.theme for documentation that will show you the syntax you need to use.

bootdisk · Post by **bootdisk** » Wed Oct 08, 2008 8:39 am

Sorry for bumping such on old thread.

But i have a question about the !showinfo announcing part.
Where can i change the ouput (the channel msg) from 1 single to several?

example:

Code: Select all

Show: Heroes) <-> URL :: http://www.tvrage.com/Heroes <-> Latest Episode : .............

To something like this:

Code: Select all

Show: Heroes
Lastest Episode: Number
Next Episode: Number
URL: url
Genre: Genre

Can that be done? I have no clue where or how to change it, is it in the theme file or in tvrage.tcl..

Best regards
bootdisk

GaveUp · Post by **GaveUp** » Wed Oct 08, 2008 9:12 am

It's been a while since I've looked at the code, but from what I remember the theme file is what you need to change. You should never have to change the code file unless your making changes/improvements (feel free to post them if you do).

From what I remember a gets translated as separation between messages so I'd try that. I seem to recall the help messages in the theme file doing this, which if I understand correctly is what you're looking for.

If this doesn't help, when I get a chance I can take a look at the code again and jog my memory more, but this should be enough to at least get you started.

bootdisk · Post by **bootdisk** » Wed Oct 08, 2008 9:34 am

GaveUp wrote:It's been a while since I've looked at the code, but from what I remember the theme file is what you need to change. You should never have to change the code file unless your making changes/improvements (feel free to post them if you do).

From what I remember a gets translated as separation between messages so I'd try that. I seem to recall the help messages in the theme file doing this, which if I understand correctly is what you're looking for.

If this doesn't help, when I get a chance I can take a look at the code again and jog my memory more, but this should be enough to at least get you started.

Uhm ok since im not a coder or understand TCl very well i think i have to wait cause i have no clue what you are meaning with "seperation between messages"

btw, can i use tcl code in the theme file? if i can do that what is the "command" to splitt a message to 2 lines instead of 1?

Regards
bootdisk

HowlinPsycho · Post by **HowlinPsycho** » Wed Oct 08, 2008 5:17 pm

bootdisk wrote:Sorry for bumping such on old thread.

But i have a question about the !showinfo announcing part.
Where can i change the ouput (the channel msg) from 1 single to several?

example:
Code: Select all
Show: Heroes) <-> URL :: http://www.tvrage.com/Heroes <-> Latest Episode : .............
To something like this:
Code: Select all
Show: Heroes
Lastest Episode: Number
Next Episode: Number
URL: url
Genre: Genre
Can that be done? I have no clue where or how to change it, is it in the theme file or in tvrage.tcl..

Best regards
bootdisk

It is using that output in the lateste releases.

Mine is like this, and I have not altered anything.

23:14:49 | @HowlinPsycho: .tvinfo Lost
23:14:52 | @BouncerB0t: Lost - Premiered: (ABC) 2004 (USA) - Class: Scripted Genre: Action | Adventure | Drama | Mystery
23:14:54 | @BouncerB0t: URL: http://www.tvrage.com/Lost
23:14:56 | @BouncerB0t: Last Episode: 04x14 - There's No Place Like Home (3) (May/29/2008)
23:14:58 | @BouncerB0t: Next Episode: 05x01 - Because You Left (Thursday at 10:00 pm 2009)
23:15:00 | @BouncerB0t: Status: Returning Series

bootdisk · Post by **bootdisk** » Thu Oct 09, 2008 9:17 am

Hehe ok i grabbed the latest version and now it shows like that

Very nice indeed.

Thanks för a great script!

unb0rn · Post by **unb0rn** » Sat Oct 18, 2008 4:52 pm

howdy there, im using the dlx-tvrage_v2 , and i have a small problem, when i use the !tonight command, i've edited it, so it shows like this:
<EGGDROP> Haunting Evidence (03x02)
<EGGDROP> Secrets of a Restaurant Chef (02x02)
<EGGDROP> MADtv (14x06)

and so on..., but i want this to show the series like this,

<EGGDROP> SERIE1 - SERIE2 - SERIE3 - etc...

but if a remove the " \n " from the tcl, is stops working...any ideias?

GaveUp · Post by **GaveUp** » Sat Oct 18, 2008 6:53 pm

This thread is not for the dlx-tvrage script. You would have better luck getting support with the dlx-tvrage script in the appropriate thread.

unb0rn · Post by **unb0rn** » Sat Oct 18, 2008 6:57 pm

Yes, i know, but i was trying to get some luck here ;x
i tried to search the thread here for the TV Rage script, but i can't found it

GaveUp · Post by **GaveUp** » Sun Oct 19, 2008 9:25 am

The first post in this thread has always had a link to the post mentioning the changes in the lastest version of this script and the link to get it.

Joori · Post by **Joori** » Wed Oct 22, 2008 9:48 pm

Sorry to be a pain, but why am i still being warned that i need dict to be installed apon loading the script when i am running tcl8.5 which has dict pre-installed into it already.

Do i still need to install the dict package despite having tcl8.5? Im using the latest version of the script under FreeBSD running eggdrop1.6.19